|Jun 19, 2002, 07:02 PM|
Joined Jun 2002
question about paint
First off...let me say that I know that this is not an electric question..but some of you guys fly glow as well..so here goes.
I am building my first glow plane and I am almost at the stage of painting it (FW-190a). I was wondering since I am going to have to put a clear flat 21st century coat on it (because I can not find any of the correct colors in a flat..only gloss) can the undercoats be a non fuel proof paint such as say rustolem spraypaint then shoot the whole thing with the fuelproof flat clear. Reason I ask is the fuel proof colors are about 8 dollars a can and rustolem is about 3.50 a can. I figured that since the top coat is fuel proof it might be ok...but thought I would ask you guys first. Thanks in advance
|Jun 20, 2002, 08:30 AM|
So long as the clearcoat is compatible with the Rustoleum, this should work fine. Note that even without clear-coating, fully cured Rustoleum will stand up to just about anything but raw fuel.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Question about paint and weight...||psunder||Foamies (Kits)||1||Dec 18, 2003 12:02 AM|
|Question about paint||chevy53||Electric Plane Talk||4||Jun 20, 2002 02:41 PM|
|Question about paint||chevy53||Power Systems||0||Jun 19, 2002 07:15 PM|
|Question about Astro 15 geared motor ?||Tom Smith||Electric Plane Talk||2||May 31, 2001 10:26 PM|
|Question about the flash 5x||jtthebiggafigga||Electric Plane Talk||5||May 27, 2001 09:14 AM|