Hello, we just finished production of the first batch of Strong Landing Gears, i attached a pic to show how much abuse they can get without breaking.

Features:

- Very strong Elastomeric material
- Underneath antenna mount on both sides
- Stronger in the area where the skid meets the plastic arc.

Looks pretty nice.

When will they be avaibable, and how much?

Duane

Price in the 15$ area, availability first days of January.

I forgot to add they come in 2 versions:

- Regular
- Low profile (about 35% lower)

regards

awesome...!!! you should do a complete T-rex with that material

And just when I thought I had finished my T-rex... Good grief.

it looks great. with that flexibility, will it ever break? Seems like I can finally beautifying my trex by using a good landing gear instead of the music wire ones

thanh

Originally Posted by thanhTran

Seems like I can finally beautifying my trex by using a good landing gear instead of the music wire ones

thanh

You need them the most thanh. j/k

The low profile set looks pretty sweet. Do you have any side shots? Are they curved forward?

i was wonderin that too, are they straight down or angled forward? I hate the shogun LG, look dull, Trex's stock are fragile but they loook speedy.

No, i need em more than Tran, i break at least three legs every 10 times that i land. They are sooo fragile/crunchy...kinda like saltine crackers. mH, please have em sooner, in the mean time, i use this desperate measure:

They always break at the joint b/t skid and strut, so i literally eliminated but CHOPPING that #### off. Dremmeled some holes on the struts and voila:

HEY, they work for now!

Originally Posted by luis104

awesome...!!! you should do a complete T-rex with that material

Can't, the frame has to be rigid, this material is only useful for LG or tail fin. Otherwise they wouldn't make those stiff carbon frames.

Originally Posted by EddieNewYork

You need them the most thanh. j/k
...

is my heli that ugly?

thanh

Originally Posted by kryptoniteRxn

...
They always break at the joint b/t skid and strut, so i literally eliminated but CHOPPING that #### off. Dremmeled some holes on the struts and voila:
...

nice fix actually
Have you tried boiling the align one? I tried and it seemed pretty good. I've not crashed it yet so I can't tell yet

thanh

Another great product Corrado. Put me on the list. Practical and good looking too.

Cheers - Boyd

Thank you Boyd.

EddieNewYork: We increased the forward angle by a good 10° and made it a little wider too.


regards,

Corrado

Originally Posted by HighFreq

EddieNewYork: We increased the forward angle by a good 10° and made it a little wider too.


regards,

Corrado

I actually prefer a straight 90° angle, nonetheless they still look good. I'll surely be picking up a set of these. Thanks Corrado.

Awwwww thanh,, ur heli look like a power pole....hehe led...light...wire...electric...darn I would not go anywhere near it lol jk