Originally Posted by Janusz Jawien

Just after maiden the new airframe... flew gread, like the old one, no trim necessary.
On those pics the generous right and up motor thrust is well visible.
The oryginal prop was used just for the pics, was flown with 3x3 GWS black prop.

Nice place fro the Rx..

I stuck mine underneath the fuse.. maybe one day I'll make a little cowl for it like the original had..

Originally Posted by foxsavage

I bought one the other day here, http://www.ubhobbies.com/displayroom...l?catuid=14722

15.50 is a bit steep.. How much was shipping.. and does he take PayPal?

I didn't fancy filling in all that to find out shipping is 10 bucks or something..

Should be free for that

Good find though....

Shipping was $5, I paid by credit card

Yayy.. I ordered one.. these are cool.

I've gotten several of the FunCraft from UB Hobbies and think they are a GREAT value!

Thay all fly awsome
Randy

Here's a video of my dog chasing the Acro-Bipe
http://www.rcgroups.com/forums/showt...30#post9812436

Congrads Fox!

Looks like you and your puppy have fun things to do in this paradise of yours!

Janusz

hi to all ,
please write here your configuration/setup(motor ,battery ,prop,esc,servo) and your flight time.
I appreciate this very.
Thank you in advance .

4x2.5 gws prop 4200kv 12x30 himax inrunner 480 mah 2 kokam 2 gws pico servos I get 2 7min flights from a charge usually unless its windy.

Mighty Midget 13/4/15T with a YGE-4, an AR6300, a 2 cell 250mah full river and 2, 2.5 gram servos I get 10 minutes or more, it flies great in the wind too

GWS IPS-50 brushed motor with GWS 3x2 prop
Blue Arrow PP 10B esc
2 x Blue Arrow 3.6g servo's (Rudder + Elevator)
6 ch Blue Arrow R3P5-H/T II Rx
And a Poly-Quest 2 Cell 300 mAh lippo
And lots of 5 min epoxy

Flight time is 15 mins minimum.. probably more but I'm being conservative I never timed it in a continous flight to be honest

Time flys when your having fun..

Awesome.. totally Awesome.. I just took her out and had a continous flight of 15 minutes. I had to stop as it was just getting too dark. I admit I was only at half throttle most of the time (didn't really need more) with the odd burst for loops and stuff. On landing (grass too long so "flipover" landing.. no damage) I checked everything and nothing was hot.. motor was a little warm but that's it.

I have been wondering about a 700mAh battery but I'm thinking two 300's will do as I love the way this flies.

mr badwrench
foxsavage
Headspin

ˇˇˇThank you!!!

hi to all ,

Hacker - E10 28L
14 g
Ř 12x30 mm
rpm 5500
5-7A
shaft Ř 1,5 mm




Ph.10 esc
2 lypo FlightPower Evo V2 20c,350mAh
this could be a good choice?



Council for propeller? 4x2,5 or 3x2 or 3x3 ?

I appreciate your advice.

Regards

6100kv? thats gonan be one FAST acrobipe.... id look for a slightly bigger battery.

5500 Kv
http://www.hackermotor.de/images/Cat...8-WEB%2040.pdf