NeSail for $209.00 at the moment if anyone is interested.

Thanks, Greg.

awesome glider. I made some mods that are worthwhile. I used ball links on tail. I used saran wrap around fuse and layed up fg around it so that I could remove horiz. stab. I then removed it and trimmed. then I attached this to the stab. I let the actuator exit out the rear with no hole. I made a small hole in extreme rear of vert. stab where it slides onto the fuse. this is how I get the pushrod thru the tail. This leaves only the horiz. pushrod to go thru the fuse. Both tails can rotate on hard landings. the tail can rotate without twisting the pushrod. they both snap into place. Fuse breaks down to just fuse. I also used just balsa to cover the wing servos. This is almost flush. I exited the antennae out the last third of the fuse but this weakened the boom so I am gonna use bullet conn. to allow running the ant. in the wing and pluggin in .

Originally posted by Gman2
awesome glider. I made some mods that are worthwhile. .

It would be cool if you could post some pictures of these mods...

Don

I'll try to snap a few shots this weekend.

Originally posted by Gman2
I'll try to snap a few shots this weekend.

Did you get a chance to take some pictures this weekend? I know that I'm not the only one itching to see your mods.

Don