Video Links - Page 5

Eeeeky · May 06, 2007, 02:32 PM

heres a video of me flying my dads Century Predator max 90 at the st george april fools funfly...enjoy!

http://videos.myrctoys.com/nitro/apr...ls-fun-fly.wmv

Lee · May 08, 2007, 08:53 AM

New Roswell Delta

http://www.vimeo.com/clip:185870

How to slice foam

http://www.vimeo.com/clip:185337

How to cut a delta

http://www.vimeo.com/clip:185342

.

natetanr · May 08, 2007, 10:12 AM

Nice work Lee!!!! Excellent Stuff. You should sell some how to dvd's. I have a question regarding the symetrical delta. Do you have to reverse the jig to make a left and a right? Or do you just make sure there is no dihedral. We can embed these videos on our website.

Thanks!!!!

Lee · May 08, 2007, 03:43 PM

One jig only. Right and left are the same. Good for simple minds like mine who want to get two left wings to fly.

The guillotine sets the angle of the dihedral. I can do anything with it I want after the basic cut.

Question:

Is it better with music or my commentary?

.

natetanr · May 08, 2007, 04:03 PM

I like the commentary. Much more informative then music.

JONBOYLEMON · May 29, 2007, 08:59 PM

http://www.youtube.com/watch?v=9t1q3...p%3Ft%3D691622

At least my crash was able to be fixed with a little glue. There is a little language right at the end. Last few seconds.

jwjohnson · May 29, 2007, 10:03 PM

Ouch! I'm surprised the SPCGR is not suing the pilot and the organizers.

Society for Prevention of Cruelty to Grass Runways

jfinch · May 29, 2007, 10:29 PM

There is a little language right at the end.

If anything deserved a "holy ####", that would be it. Do you think someone bumped his arm/hand or did he have a servo go bad?

JONBOYLEMON · May 29, 2007, 11:28 PM

This is ripped off from elsewhere so hope its not a misquote.

The cause of the Super Bandit crash is being reportedly determined by David Shulman himself as a Quirk in the JR 10X failsae protection. They've been able to recreate it and is being said that while flying outside the range of a second TX on the same channel (hopefully left unknowlingly ON) that once within range of the second TX that a split millisecond of 1/2 stick down elevator is routinely observed before the 10X failsafe is able to return to hold last command.

Going that fast that low will exaggerate its effect more than most models.

David in jest said he'd better start doing them low passes inverted....

jwjohnson · Jun 21, 2007, 10:23 PM

This guy has some nice quality video. Check out this 3D capable jet.

http://higherplaneproductions.com/me...3DJet_H264.mov

Clamb · Jun 27, 2007, 11:23 PM

I've seen a few of these 3D precision flying clips. This is about the best yet. Care to dance?

http://airtoimedia.nl/web/upload/Jur...-AM_Benoit.wmv

Lee · Jul 07, 2007, 02:11 AM

Some people have too much time on their hands. This actually is kinda cool. It's a flying hammerhead shark.

http://www.rcgroups.com/forums/showa...mentid=1007897

Lee · Jul 07, 2007, 10:15 PM

I saw these videos at slow fly along time ago but have had more interest for a yard flyer. They are EPP 22" and 28" EPP rubber bouncy planes.

http://www.slofly.com/videos/3d/

http://slofly.com/cart/product_info....roducts_id=747

http://www.rcgroups.com/forums/showt...82174&page=346

JONBOYLEMON · Jul 11, 2007, 12:20 AM

Just in case anyone thought they had a powerful setup.

http://www.pioniers-venray.nl/filmpjes/s14.wmv

Todd I say you can do better.

jfinch · Jul 11, 2007, 01:43 AM

Awesome video! I love those F5B ships! But at $1,150 for just the airframe (and probably more then that for the power system) I think it's WAY out in the future for me.

May 08, 2007, 03:43 PM	#64
Lee PERFECT LANDING !!! Join Date: Jul 2004 Location: Orem, Utah USA Posts: 4,007	One jig only. Right and left are the same. Good for simple minds like mine who want to get two left wings to fly. The guillotine sets the angle of the dihedral. I can do anything with it I want after the basic cut. Question: Is it better with music or my commentary? . Last edited by Lee; May 08, 2007 at 04:01 PM.

May 29, 2007, 08:59 PM	#66
JONBOYLEMON Adequate times 2. 10-96 Join Date: May 2002 Location: American Fork, Utah, United States Posts: 4,316	El Crappppy tan http://www.youtube.com/watch?v=9t1q3...p%3Ft%3D691622 At least my crash was able to be fixed with a little glue. There is a little language right at the end. Last few seconds.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discussion Cool video links of the SU27 :D	Extreme_RC	Australia	5	Sep 18, 2006 06:26 PM
Discussion GWS Video Links	sutlane	GWS (Grand Wing Servo)	0	Jan 15, 2006 11:01 AM
RC-CAM.co.uk - Online Shopping and Video Links - Now Available	Alan Ward	rec.models.rc.air	0	Sep 16, 2003 04:00 AM
Post video links....finally got fast connection	Al P	Electric Plane Talk	7	Feb 04, 2002 08:11 PM

May 06, 2007, 02:32 PM	#61
Eeeeky on a vacation Join Date: Oct 2004 Location: Roosevelt UT Posts: 1,944	heres a video of me flying my dads Century Predator max 90 at the st george april fools funfly...enjoy! http://videos.myrctoys.com/nitro/apr...ls-fun-fly.wmv

May 08, 2007, 10:12 AM	#63
natetanr Utah Flyers Join Date: Dec 2004 Location: South Ogden, UT Posts: 1,406	Nice work Lee!!!! Excellent Stuff. You should sell some how to dvd's. I have a question regarding the symetrical delta. Do you have to reverse the jig to make a left and a right? Or do you just make sure there is no dihedral. We can embed these videos on our website. Thanks!!!!

May 08, 2007, 04:03 PM	#65
natetanr Utah Flyers Join Date: Dec 2004 Location: South Ogden, UT Posts: 1,406	I like the commentary. Much more informative then music.

May 29, 2007, 10:03 PM	#67
jwjohnson Hit Me! Please! Join Date: Jan 2005 Location: Provo, UT Posts: 2,051	Ouch! I'm surprised the SPCGR is not suing the pilot and the organizers. Society for Prevention of Cruelty to Grass Runways

May 29, 2007, 10:29 PM	#68
jfinch Hard Left... Join Date: Jul 2005 Location: Pleasant Grove, UT Posts: 2,041	There is a little language right at the end. If anything deserved a "holy ####", that would be it. Do you think someone bumped his arm/hand or did he have a servo go bad?

May 29, 2007, 11:28 PM	#69
JONBOYLEMON Adequate times 2. 10-96 Join Date: May 2002 Location: American Fork, Utah, United States Posts: 4,316	This is ripped off from elsewhere so hope its not a misquote. The cause of the Super Bandit crash is being reportedly determined by David Shulman himself as a Quirk in the JR 10X failsae protection. They've been able to recreate it and is being said that while flying outside the range of a second TX on the same channel (hopefully left unknowlingly ON) that once within range of the second TX that a split millisecond of 1/2 stick down elevator is routinely observed before the 10X failsafe is able to return to hold last command. Going that fast that low will exaggerate its effect more than most models. David in jest said he'd better start doing them low passes inverted....

Jun 21, 2007, 10:23 PM	#70
jwjohnson Hit Me! Please! Join Date: Jan 2005 Location: Provo, UT Posts: 2,051	This guy has some nice quality video. Check out this 3D capable jet. http://higherplaneproductions.com/me...3DJet_H264.mov

Jun 27, 2007, 11:23 PM	#71
Clamb Chuck Join Date: Dec 2006 Location: Highland, Utah Posts: 426	I've seen a few of these 3D precision flying clips. This is about the best yet. Care to dance? http://airtoimedia.nl/web/upload/Jur...-AM_Benoit.wmv

Jul 07, 2007, 02:11 AM	#72
Lee PERFECT LANDING !!! Join Date: Jul 2004 Location: Orem, Utah USA Posts: 4,007	Some people have too much time on their hands. This actually is kinda cool. It's a flying hammerhead shark. http://www.rcgroups.com/forums/showa...mentid=1007897

Jul 07, 2007, 10:15 PM	#73
Lee PERFECT LANDING !!! Join Date: Jul 2004 Location: Orem, Utah USA Posts: 4,007	I saw these videos at slow fly along time ago but have had more interest for a yard flyer. They are EPP 22" and 28" EPP rubber bouncy planes. http://www.slofly.com/videos/3d/ http://slofly.com/cart/product_info....roducts_id=747 http://www.rcgroups.com/forums/showt...82174&page=346

Jul 11, 2007, 12:20 AM	#74
JONBOYLEMON Adequate times 2. 10-96 Join Date: May 2002 Location: American Fork, Utah, United States Posts: 4,316	Just in case anyone thought they had a powerful setup. http://www.pioniers-venray.nl/filmpjes/s14.wmv Todd I say you can do better.

Jul 11, 2007, 01:43 AM	#75
jfinch Hard Left... Join Date: Jul 2005 Location: Pleasant Grove, UT Posts: 2,041	Awesome video! I love those F5B ships! But at $1,150 for just the airframe (and probably more then that for the power system) I think it's WAY out in the future for me.