|Feb 19, 2005, 07:24 PM|
F/S Rodel 4 Meter Discus 2A
I have a new Rodel 4m Discus 2A. I got this about a year ago and did some work to it but have lost interest. I have all the servos in the fiberglass fuse, so that is ready to go. The retract is installed as is the nose release. They use a Hitec retract servo to drive both. The wings are foam covered with Obichi. They have been covered in Oracover white except for 1 aileron. There is a JR241 in one of the tiplets already installed. None of the wing servos are in.
I have the manuals and servo boxes for it. The canopy is done but need to be installed, I also have a spare canopy.
I WILL NOT SHIP THIS THING. The box is huge and I do not want to make a crate for it. I will be at the WRAM show this weekend and can deliver it to you there. I will also meet some one with in 100 milles of North east NJ.
A new one is $750.00 from Derstine. You can have this with most of the work already done, servos in the fuse and the servo in the wingtip for $700.00.
I can get pictures to those that are serious.
Link for info on it:
|Thread||Thread Starter||Forum||Replies||Last Post|
|F/S - GWS 4 Ch Rx, Um-1 RX Xtral, Gws ESC||Rugar||Aircraft - Electric - Airplanes (FS/W)||8||Oct 10, 2004 09:18 PM|
|Whoops! CG for AMD 4 meter discus??||kevin kavaney||Scale Sailplanes||0||Sep 30, 2004 11:25 PM|
|Come see a 4 meter Discus at Scobee||Terror Dactyl||Thermal||0||Sep 03, 2004 04:36 PM|
|F/s 1/4 Scale Hp18||muss51||Aircraft - Sailplanes (FS/W)||6||Jul 21, 2004 05:10 PM|
|F/S Futaba 4 channel Transmitters||AstroNut||Aircraft - Electric - Airplanes (FS/W)||2||May 06, 2002 07:47 AM|