HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by Tony Oliver, who may elect to delete unwanted replies.
Old Mar 20, 2005, 04:38 PM
Registered User
central AZ
Joined May 2002
1,331 Posts
What size are the tiles? If they're a foot across, I think that's a pretty decent sized model.
KnifeEdge51 is online now Find More Posts by KnifeEdge51
Reply With Quote
Sign up now
to remove ads between posts
Old Mar 20, 2005, 07:14 PM
Registered User
Ajax, Ontario, Canada
Joined Oct 2004
2,589 Posts
>I think that's a pretty decent sized model.

44 1/2" according to the plan I have. However there were several kit versions, and plans published, so there may be slight variations
Applehoney is online now Find More Posts by Applehoney
Reply With Quote
Old Mar 21, 2005, 05:12 PM
Registered User
Bill Mixon's Avatar
Georgia
Joined Mar 2002
1,690 Posts
The tiles are only 9", and yes it spans around 44". I know there are many bigger rubber powered models. Span wise it's not that big, in fact it's about the same span as the coupe above. It's just that the fuse is so wide and tall + tall landing gear, big single blade folder, etc that it makes the plane seem BIG.
Regards,
Bill
Bill Mixon is offline Find More Posts by Bill Mixon
Reply With Quote
Old Mar 27, 2005, 10:32 AM
Love is like Pi: Irrational
ronmeister's Avatar
USA, ND, Grand Forks
Joined Jan 2005
2,159 Posts
Quote:
Originally Posted by Tony Oliver
It certainly is, Ian.

Definitely different! That one has a Cox Golden Bee, and is overpowered. Very careful trimming needed as is adherence to the building and set-up suggestions.

The launch is also a bit touchy. Too fast and it will roll; too slow and the ground gets it. The secret seems to be to keep the top half of the 'fuselage' light. Marked anhedral, no fin (in the usual sense). It's an amazing design. An absolute hoot to fly when it's trimmed.

Tony
hi tony

i am getting back into free flight (i have a dozen old .049 engines and have nothing to do with them) and i am really interested in that plane which has those two "circle" airfoils

i was wondering were you got the kit for it (or did you build it from scratch )

thanks
ronmeister is offline Find More Posts by ronmeister
Reply With Quote
Old Mar 27, 2005, 10:37 AM
Registered User
Tony Oliver's Avatar
North-East England
Joined Mar 2002
3,402 Posts
Ron - take a look in your email - a copy of the drawing is there!
Tony Oliver is offline Find More Posts by Tony Oliver
Reply With Quote
Old Mar 27, 2005, 02:48 PM
Hey Now
Cocoa Beach, Florida
Joined Feb 2004
2,655 Posts
Indoor freeflight

Here's a 2 pics from our indoor freeflight event yesterday. The little boy is only 3 years old. He launched his Penny Plane by himself. The other photo is my Pennyplane just cruising. Check out http://groups.yahoo.com/group/FloridaIndoorFreeflight/
speleopower is offline Find More Posts by speleopower
Last edited by speleopower; Mar 27, 2005 at 02:49 PM. Reason: added text
Reply With Quote
Old Mar 27, 2005, 08:48 PM
Free Flight rubber flyer
jwfinn's Avatar
United States, GA, Warner Robins
Joined Mar 2005
506 Posts
Quote:
Originally Posted by gossie
Nice one that HI-HO, and nice colours too. Nice part of the world too, was in NC a couple of times and would go to Charleston for the weekends. Could NEVER find any F/F activity there though. George Perryman (now passed) was in Georgia but was too far to 'touch base'. Can you fly it at the airport????? The HI-HO that is.
Well, I've got permission to fly whatever I want (within reason-no rockets), but this bird just takes too much room. The airport is over a mile long and only 250 acres, so not very wide. I've gotten flights of almost 8 minutes there on calm days from small stuff, but wakefields eat up a field fast enough to make one's head spin.

There is very little FF activity, but I'm starting to make contact with a few people. Some guys fly indoor down at the Citadel quite frequently.
jwfinn is online now Find More Posts by jwfinn
Reply With Quote
Old Mar 28, 2005, 12:03 PM
Love is like Pi: Irrational
ronmeister's Avatar
USA, ND, Grand Forks
Joined Jan 2005
2,159 Posts
Quote:
Originally Posted by Tony Oliver
Ron - take a look in your email - a copy of the drawing is there!
seems that the email isnt there tony

would you please send it again

ronalray@hotmail.com

heres a direct link to my email


thanks again
ronmeister is offline Find More Posts by ronmeister
Reply With Quote
Old Mar 28, 2005, 02:59 PM
Registered User
Tony Oliver's Avatar
North-East England
Joined Mar 2002
3,402 Posts
Sent a couple of minutes ago!
Tony Oliver is offline Find More Posts by Tony Oliver
Reply With Quote
Old Mar 29, 2005, 05:40 PM
Love is like Pi: Irrational
ronmeister's Avatar
USA, ND, Grand Forks
Joined Jan 2005
2,159 Posts
i recieved it thanks
ronmeister is offline Find More Posts by ronmeister
Reply With Quote
Old Mar 30, 2005, 06:01 PM
Love is like Pi: Irrational
ronmeister's Avatar
USA, ND, Grand Forks
Joined Jan 2005
2,159 Posts
i just wrote the 100 post on this thread


lets celebrate guys
ronmeister is offline Find More Posts by ronmeister
Reply With Quote
Old Mar 31, 2005, 02:58 PM
Registered User
Tony Oliver's Avatar
North-East England
Joined Mar 2002
3,402 Posts
F/F pics

As I started this thing off, here are three of my current crop to start the pics in the second hundred posts. No prizes for identifying, but they should stir some memories.

Tony Oliver is offline Find More Posts by Tony Oliver
Reply With Quote
Old Mar 31, 2005, 03:17 PM
Registered User
Gold Coast Australia.
Joined Jan 2005
2,503 Posts
Just a guess---Quad???? Le Kid, got a plan somewhere, Model Aircraft l think, and was orig. pre-war. Mimi. Had one of these with a real Dart in it in the 50s.
All great old models, and bet they all fly well too. GOOD TO SEE 'EM.
gossie is offline Find More Posts by gossie
Reply With Quote
Old Mar 31, 2005, 08:03 PM
Registered User
Gold Coast Australia.
Joined Jan 2005
2,503 Posts
F/F forever.

Got a model or two out today for some pics.
Rubber is job is a 'JEKYLL & HYDE from '54 Aeromodeller mag.
Just gets in for OZ vintage, and it maxed out to win it last year.
45in span--50in long--100 grams rubber.

Faultless Chick bipe from late 40s MAN mag, 45in span, old OK 09. Good flyer.
gossie is offline Find More Posts by gossie
Reply With Quote
Old Apr 01, 2005, 02:17 AM
Registered User
Tony Oliver's Avatar
North-East England
Joined Mar 2002
3,402 Posts
Spot on Gossie!

Kwod is Eric Clutton's model. Le Kid is a superb flyer and for a 1930s model, very advanced. Mimi is grossly overpowered with an 049 - prop on backwards and running rich, it still is.

I must look up the J&H. The Faultless Chick's new to me - very pretty design.
Tony Oliver is offline Find More Posts by Tony Oliver
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
post your gws slowflyer pics here! buffpants24 Parkflyers 0 Jul 02, 2003 12:38 AM
Post your Viper Twin Pics Here! Zagi-Extreme Foamies (Kits) 3 Mar 30, 2003 09:04 PM
Post Your Zagi 400X Pics Here HavingFun2002 Foamies (Kits) 63 Feb 02, 2003 01:21 AM
Post your Aeroflakes meet pics here Jgardner Scratchbuilt Indoor and Micro Models 38 Jan 24, 2003 03:44 PM
Post your fun fly pics here. Paul Susbauer 3D / Fun Fly Fuel Planes 8 Jan 23, 2003 03:11 AM