|Feb 21, 2002, 11:32 PM|
Joined Apr 2001
Qual Comm internal resistance
I decided to measure the internal resistance of the cells in a Qual Comm 830 mah pack at room temp and in the cold outside.
Inside (70 deg F): 465 mohm/pack of two cells
Outside (32 deg F): 793 mohm/pack of two cells
I use these packs in situations where I have used 110 mah NiCads and 270 mah NiMh cells because the weight of the resulting packs is similar. I have measured these cells to have 57 and 110 mohm/cell respectively at 70 deg F. Packs of 6 cells (close to the voltage of the Qual Comms) thus have total internal resistance of 342 mohm for the Nicads and 660 mohm for the NiMh.
The Qual Comm packs beat the NiMh at room temp and even in the cold are not much worse than the NiMh at room temp.
NiMh packs have always been disapointing in the cold weather. It looks like the Qual Comms will be good for winter flying.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Matching of cells with Apex internal resistance meter.||John Jennings||Batteries and Chargers||9||Nov 14, 2002 01:25 AM|
|Measuring internal resistance?||JBowling||Batteries and Chargers||3||Oct 09, 2002 12:20 PM|
|9x7 or 10x8 for qual comm powered moth?||barn buster 50||Parkflyers||4||Feb 20, 2002 08:53 PM|
|internal resistance of 2/3aaa nimh?||singlespeed7||Parkflyers||0||Nov 05, 2001 06:03 PM|
|Battery Internal Resistance||E-Man||Power Systems||2||Jul 24, 2001 11:06 PM|