How to balance Corona blades with Kyosho balancer

lempert · Jul 21, 2004, 01:41 AM

Hi

How to balance Corona blades with Kyosho balancer ?
Is it possible ?

thanks

ProfitOfDoom · Jul 21, 2004, 02:28 AM

well I dunno if its needed to balance them,I just put 2 brand new blades on my heli, and before i did I have this lil digital scale and I weighed both of them and they weighed the exact same,So I think there pretty much balanced.

mando · Jul 21, 2004, 06:34 AM

Here's some info http://www.rcgroups.com/forums/searc...earchid=469987

Mando .

BobRCnut · Jul 21, 2004, 11:00 AM

Not sure I agree.. I bought a new set a week ago, and they were off by between 1 and 3 grams (my LHS' scale has only 2 gram resolution). That's a good-sized chunk of tape on one blade. Rather than run back and forth, I made a simple beam balance adapter for my Robart balancer.. it doesn't give me the weight of each, but it DOES allow me to match them perfectly and find each blade's CG before doing any dynamic balancing. I'm not familiar with the Kyosho balancer, though.

Larry3215 · Jul 21, 2004, 11:17 AM

Quote:

Originally Posted by mando

Here's some info http://www.rcgroups.com/forums/searc...earchid=469987

Mando .

Mando, The link doesnt work for me.

Larry

mando · Jul 21, 2004, 12:30 PM

That's strange , just do a search in these forums for " ksj blade balancer "
and it should list about 10 threads . Plenty of tips there .

Mando .

Jul 21, 2004, 01:41 AM	#1
lempert Registered User Tel Aviv Joined May 2002 266 Posts	How to balance Corona blades with Kyosho balancer Hi How to balance Corona blades with Kyosho balancer ? Is it possible ? thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question How to balance a 10S FP with 2 V-balancers ?	Ally	Batteries and Chargers	3	Dec 28, 2006 06:11 PM
Discussion How to balance a 10S pack with a 6S balancer.	Tom Viper	Batteries and Chargers	13	Jun 30, 2006 04:09 AM
Balancing Corona blades on a KSJ Balancer	Orion_V	Electric Heli Talk	8	May 11, 2004 09:36 PM
any good link on How to balance blades?	thazy2	Electric Heli Talk	3	Jan 29, 2003 01:33 PM
How To Instal Landing Gear with A Steerable Nose Wheel On the Kyosho T33?	Joe Elston	Electric Ducted Fan Jet Talk	6	May 10, 2001 10:19 PM

RCG Sites

About RCG

Features

Tools

Media

Topics

Jul 21, 2004, 02:28 AM	#2
ProfitOfDoom Registered User CLEVELAND,OHIO Joined Feb 2003 362 Posts	well I dunno if its needed to balance them,I just put 2 brand new blades on my heli, and before i did I have this lil digital scale and I weighed both of them and they weighed the exact same,So I think there pretty much balanced.

Jul 21, 2004, 06:34 AM	#3
mando BlueGrass Rules United States, IL, Dahlgren Joined Nov 2003 1,094 Posts	Here's some info http://www.rcgroups.com/forums/searc...earchid=469987 Mando .

Jul 21, 2004, 11:00 AM	#4
BobRCnut AMA 754 Phoenix area Joined Apr 2004 1,472 Posts	Not sure I agree.. I bought a new set a week ago, and they were off by between 1 and 3 grams (my LHS' scale has only 2 gram resolution). That's a good-sized chunk of tape on one blade. Rather than run back and forth, I made a simple beam balance adapter for my Robart balancer.. it doesn't give me the weight of each, but it DOES allow me to match them perfectly and find each blade's CG before doing any dynamic balancing. I'm not familiar with the Kyosho balancer, though.

Jul 21, 2004, 12:30 PM	#6
mando BlueGrass Rules United States, IL, Dahlgren Joined Nov 2003 1,094 Posts	That's strange , just do a search in these forums for " ksj blade balancer " and it should list about 10 threads . Plenty of tips there . Mando .