HobbyKing.com New Products Flash Sale

Locked Up RC M2 Acorn Nuts

Scale hardware

Splash

Complete the look of your scale wheels with these Acorn Nuts from Locked Up RC!

The one thing that is usually the dead giveaway on a scale RC vehicle that keeps it from looking like the real deal is the hardware used to build it. Locked Up RC has got the solution with scale-looking hardware. This time around they are offering M2 Acorn Nuts, which are perfect for scale wheels. The idea is to use them to mimic the lug nuts used on full-size wheels. They simply thread on to M2 screws. Locke Up RC offers the Acorn Nuts in packs of 32.

SPECIFICATIONS
Inner threadM2
Overall height~4.5mm
Width across flats3mm
Maximum width3.5mm
Tool required3mm hex socket driver
Item no.1231-M2
Price $8.25 (32-pcs)

Note: Keep in mind that you need to have 1.5-2.5mm of thread on your exposed M2 hardware poking through the face of your wheel. If the bolts on your wheels are to long you can pick up a pack of Locked Up RCís M2 x 8mm screws (item no. 1211-M2x8b).

Learn moreóLOCKED UP RC!

.

Discussion

Reply
Thread Tools
There are no posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
News Locked Up RC Scale Hex Bolts Paul Onorato Car Talk 0 Jan 31, 2014 11:38 AM
News Locked Up RC ó OT Shafts Paul Onorato Car Talk 0 Jan 23, 2014 09:27 AM
News JConcepts TLR 22 front axle conversion and low-profile locking wheel nuts Paul Onorato Car Talk 0 Oct 04, 2013 05:03 PM
Wanted I need an prop adapter/acorn nut for flyware David Hogue Aircraft - General - Miscellaneous (FS/W) 0 Mar 14, 2006 08:13 PM