SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Reply
Thread Tools
This thread is privately moderated by jjmelo, who may elect to delete unwanted replies.
Old Feb 26, 2014, 11:24 PM
Registered User
jjmelo's Avatar
United States, CA, Burbank
Joined Aug 2012
445 Posts
Trader Rating: 82
$50.00 USD
Seller Pays Shipping
For Sale
Mini Crow - 3D Printed Mini H Quad + hardware

Introducing the Mini Crow, a 3D printed Mini Quad frame, in an H configuration, that makes it perfect for FPV. I print these frames myself using black ABS plastic. The frame itself is very light and strong. I built my prototype using Aoxing 2100KV motors, 3 blade 5030 Gemfan props, 10A ESCs and a CC3D controller. To keep it light, Iím using 1,000 mah 3S Lipos (6 minutes aggressive flight). Here's a video of my flying one (more tuning required).

Mini Crow - 3D Printed Mini H Quad (1 min 26 sec)


These frames are $50 (including shipping to the US) and I include all the hardware (nylon mounts and the machine screws and nuts to bolt it together). I'm selling them directly on my site, link below. Just use the Buy It Now button and to be redirected to PayPal.

http://www.flitereport.com/store/min...-quad-for-fpv/
jjmelo is offline Find More Posts by jjmelo
RCG Plus Member
Last edited by jjmelo; Feb 26, 2014 at 11:30 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Feb 27, 2014, 02:35 AM
Registered User
United States, CA, Auburn
Joined Jan 2009
781 Posts
Trader Rating: 8
i like it ..
pinoydad is online now Find More Posts by pinoydad
Reply With Quote
Old Feb 27, 2014, 06:25 AM
Registered User
United States, MD, Annapolis
Joined Jun 2013
2,723 Posts
Trader Rating: 80
Will these fit zmrs or suppos a1510s?
Waterbound is offline Find More Posts by Waterbound
RCG Plus Member
Latest blog entry: Hubsan H107D Custom FPV Setup
Reply With Quote
Old Feb 27, 2014, 06:35 AM
Registered User
jjmelo's Avatar
United States, CA, Burbank
Joined Aug 2012
445 Posts
Trader Rating: 82
The mounting pattern on the arms is 15x12 or 12x12. I can easily modify the mounting pattern for the motor to 13x13mm, which is the pattern for those motors. Just leave a note and I'll print the arms like that, no problem.
jjmelo is offline Find More Posts by jjmelo
RCG Plus Member
Latest blog entry: Durafly Das Ugly Stik Review
Reply With Quote
Old Feb 27, 2014, 09:06 PM
Registered User
United States, AZ, Flagstaff
Joined Aug 2013
55 Posts
Trader Rating: 4
I like this. I am really thinking about it... great proximity low level flying platform. Bit bigger than the Blackout. Any other suggestions for motors for it?
NAUJK is offline Find More Posts by NAUJK
Reply With Quote
Old Feb 27, 2014, 09:13 PM
Registered User
jjmelo's Avatar
United States, CA, Burbank
Joined Aug 2012
445 Posts
Trader Rating: 82
These motors are awesome. http://www.rcgroups.com/forums/showthread.php?t=2112708
jjmelo is offline Find More Posts by jjmelo
RCG Plus Member
Latest blog entry: Durafly Das Ugly Stik Review
Reply With Quote
Old Mar 07, 2014, 03:01 AM
Registered User
DirtyDovi's Avatar
United States, NY, Cortland
Joined Apr 2013
2,142 Posts
Trader Rating: 5
I am super-stoked to have run across these frames!
Last week I talked to jjmelo about one,
and this week, I have mine in hand!

Julian went above and beyond,
and these frames are amazing!

If there is anyone that is interested in these,
but 'still thinking about it' - Just pull the trigger!

Thank you again J, You da' man! *Thumbs Up*



Sam -

PS:

Link to my blog - Mini Crow Mock-Up / Build:
http://www.rcgroups.com/forums/member.php?u=474437

And a few pics -
DirtyDovi is offline Find More Posts by DirtyDovi
RCG Plus Member
Old Mar 08, 2014, 10:39 PM
Registered User
United States, NY, Buffalo
Joined Mar 2007
330 Posts
Trader Rating: 3
Wow! I like it! You linked to x2204's so I'm guessing you can print these to work with their bolt pattern (19mm I think?). Will 6 inch props work?

Edit: ahh saw on your page that 6" are supported. This is definitely on my short list!
bennymack is online now Find More Posts by bennymack
Reply With Quote
Old Mar 08, 2014, 10:41 PM
Registered User
jjmelo's Avatar
United States, CA, Burbank
Joined Aug 2012
445 Posts
Trader Rating: 82
6" props will work. I can print it for any bolt pattern. I customized DirtyDovi's to 12 x 12mm.
jjmelo is offline Find More Posts by jjmelo
RCG Plus Member
Latest blog entry: Durafly Das Ugly Stik Review
Reply With Quote
Old Mar 08, 2014, 11:34 PM
Registered User
DirtyDovi's Avatar
United States, NY, Cortland
Joined Apr 2013
2,142 Posts
Trader Rating: 5
Progress!



Build info and pics:

http://www.rcgroups.com/forums/showthread.php?t=2119250
DirtyDovi is offline Find More Posts by DirtyDovi
RCG Plus Member
Old Mar 15, 2014, 09:44 PM
Registered User
United States, NY, Buffalo
Joined Mar 2007
330 Posts
Trader Rating: 3
Does this have holes for 36mm FCB with the 30.5mm bolt hole patterns? Or is that just a special request like with the x2204 motor holes? I found some motors and ordered them by the way. I'll probably be pulling the trigger on this guy shortly.
bennymack is online now Find More Posts by bennymack
Reply With Quote
Old Mar 17, 2014, 03:14 AM
Registered User
jjmelo's Avatar
United States, CA, Burbank
Joined Aug 2012
445 Posts
Trader Rating: 82
You can bolt down a KK 2 ....that's 50x50mm. I can make the holes in custom places if you'd like.
jjmelo is offline Find More Posts by jjmelo
RCG Plus Member
Latest blog entry: Durafly Das Ugly Stik Review
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 3D Printed Mini H-Quad G-unit Aircraft - Electric - Multirotor (FS/W) 2 Feb 21, 2014 02:03 PM
For Sale Mini Crow - 3D Printed Mini H Quad + hardware jjmelo Aircraft - Electric - Multirotor (FS/W) 6 Feb 19, 2014 09:17 PM
For Sale Mini Crow - 3D Printed Mini H Quad jjmelo Aircraft - Electric - Multirotor (FS/W) 8 Feb 17, 2014 08:58 AM
For Sale Mini 3D Printed H-Quad G-unit Aircraft - Electric - Multirotor (FS/W) 9 Dec 31, 2013 01:13 PM
Discussion 3d printed Mini H frame of POLAKIUM Engineering 1sq Mini Multirotors 0 Oct 23, 2013 12:37 AM