|Sep 08, 2013, 10:05 AM|
France, Midi-Pyrénées, Castelmaurou
Joined Aug 2013
1000mW FPV Aomway TX and final integrations
So. Seems that I finally made it. The F550 is now ready for takeoff. With a total weight of 2.245g I'm also some 35g below the initial configuration with solid skids. I have moved the GPS to the center as I was forced to advance the Zenmuse a bit to avoid props in the picture. The battery goes now as far as possible to the rear end of the top-plate.
I wired up the OSD and the Aomway 1 Watt 5,8GHz TX. Works perfect with my Fatsharks. Just a bit noisy due to its integrated fan. I thought the power drain of the 1W was a lot higher compared to the Fatshark 600mW TX, but it consumes nearly the same.
Here's a small video from tonight's first flight test, I was easy on the sticks.
Hope wind calms down a bit to test it a bit further.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||Transmission distance 10KM New AOMWAY 5.8G 1000mw TX||RC4YFPV||FPV Equipment (FS/W)||66||Sep 07, 2014 07:36 PM|
|Discussion||AOMWAY 1000MW TX coming out||RC4YFPV||FPV Talk||24||Feb 02, 2014 05:36 PM|
|For Sale||BOSCAME FPV 5.8G 1W 1000MW Video Audio Transmitter TX 5KM for 5.8GHz Rx Receiver||uuustore1||FPV Equipment (FS/W)||5||Aug 16, 2013 11:48 AM|
|Sold||AOMWAY 5.8G 1000mw TX transmission distance 10KM||RC4YFPV||FPV Equipment (FS/W)||10||Jul 21, 2013 10:40 PM|
|Sold||FPV 2.5 1000mW, Tx, Rx. 250mW Tx||Beauregard||Aircraft - General - Miscellaneous (FS/W)||1||May 03, 2010 05:01 PM|