HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by DismayingObservation, who may elect to delete unwanted replies.
Old Mar 11, 2013, 02:52 PM
Transmogrified.
DismayingObservation's Avatar
Southern California
Joined Feb 2006
2,656 Posts
Discussion
Brain fade and how to prevent it...

Step one: Think.

Since I had the privilege of reviewing the Helizone RC Lightning Bird helicopter for this site, I now count myself among the ranks of the WLtoys V911 faithful.

This is one fun little heli.

Sadly, all things eventually break and so was the case with the tail motor. The endbell and brushes finally popped off like something out of a Road Runner cartoon. Those who remember cartoonist Don Martin and his work for Mad can envision that motor popping apart accompanied with such onomatopoeic embellishments as "GLORK," "TOING" and "SPLAB-A-DAP." I sure did.

No motors on Helizone's Amazon store, "Halley R Us." A quick call to the main office later, I was promised a new motor which arrived this morning. Having glued and debonded more tail booms from my old E-flite Blade CP than I can count, I thought this would be a cinch.

Nope. Here's where thinking came in.

I cut the wires near the motherboard, put a few drops of CA debonder, let the stuff work and...nothing. That boom wasn't going anywhere and the slightly ominous sounds of overstressed carbon fiber warned me not to try anything rash.

Well, no problem. I'd just strip and resolder the cut leads and solder the new motor leads back at the tail. Right?

Nope again.

The insulation had gotten torn down where the wires exited the tail boom. The result of all this is a working Lightning Bird...with exposed tail wires taped to the boom. It's a neat repair and doesn't look too bad, but let's say it upsets my aesthetic sensibilities.

(Yeah, I know. Poor baby. )

That little heli is too nice a model, so the next time it needs a tail motor, I'll pick up a new boom and frame because some things are worth doing right.

Like thinking.
DismayingObservation is offline Find More Posts by DismayingObservation
RCG Plus Member
Last edited by DismayingObservation; Mar 13, 2013 at 10:24 AM.
Reply With Quote
Sign up now
to remove ads between posts
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion How to Power a Turnigy Super Brain 100 ESC stuka Power Systems 2 Mar 03, 2013 07:53 AM
Discussion How do you prevent broken balance leads? mybad Batteries and Chargers 5 Feb 28, 2013 09:47 AM
Mini-HowTo Key cam 808 #16 how to prevent this from happening fishycomics Aerial Photography 4 Jan 03, 2013 06:10 AM
Discussion Saito 62A brain fade Paverpilot Engines 8 Mar 09, 2009 12:20 PM
brain fade with my m60 surferx Slope 16 Sep 21, 2003 09:07 PM