Hi friends, i will show here a quick build for my EDF glider..... i will call it: Eclipse EDF Glider. I did a prototype and i love it! hehehe. So let´s scratchbuild!

Specs:

Wing: 1,8 m
Fuselage: 1,2 m
Servos: 2- Mg90, 2- 9g Hextr.
EDF: 68mm Shulman Aviation, 3700kv
ESC: 80a
Lipo: 4s 4000ma

Humberto

Stage 1

Stage 2 - Shaping the foam block

Stage 3 - Refining the shape and sanding

Lost foam?

Subscribed

look's like good build just wondering if you lose some forward thrust with that set up

space 1,

If i lose thrust, it is a very little.. the actual prototype it is very fast, i think fast enough for a glider, hehehe

Stupot46,

Maybe i will lost foam, in my prototype i use the foam as internal structure for edf, battery, and exit tube...

where you get prototype from

Humbertomelo - a beautiful design with great lines.

Is this the same glider that you videoed a while back?

If it is then you wouldn't need to worry too much about loss of thrust !

Looking forward to the rest of the build.

Steve

Originally Posted by meerkat13

Humbertomelo - a beautiful design with great lines.

Is this the same glider that you videoed a while back?

If it is then you wouldn't need to worry too much about loss of thrust !

Looking forward to the rest of the build.

Steve

I was asking humbertomelo where he got plane

Originally Posted by space 1

I was asking humbertomelo where he got plane

Methinks he might have built it

space 1,

I design and build the prototype... now is the second build, more refined.

Humberto

Glassing with epoxi resin and fiber glass cloth 110g/m2

Apply some light mass and cutting the canopy, intake duct and exit duct