Hi good day! and yes I have a new heli and I don't know how to set/program a servo to start with the new heli that just arrived the other day...well, flying for me is easier than the electronics and wires all over it...

They are Align servos > some of you or many of you are familiar with it, but not me. My current heli is 120sr RTF and all I do is fly with it. The servo has 3 small ones - say ail, elev and pitch and the rear bigger one, plus BEC batt.(speed cont).

For the Rx > spek ar8000. with tm1000(telemetry)
Batt > align 11.1v 40c 3cell. (how to connect this to the BEC?)


can anybody help me with this plsssss...
Thanks in advance
pit.

What is the heli?

Originally Posted by Balr14

What is the heli?

blar14 > 450 3gx v2 fbl

pit

Nice heli, but I am not familiar with your terminology. you should have 4 servos and a 3GX unit that you plug the servos into. You may have a BEC associated with the tail servo. That gets it's own lead from the battery, to ensure the tail servo has an independent power supply. You can find 3GX setup videos on Youtube

Originally Posted by Balr14

Nice heli, but I am not familiar with your terminology. you should have 4 servos and a 3GX unit that you plug the servos into. You may have a BEC associated with the tail servo. That gets it's own lead from the battery, to ensure the tail servo has an independent power supply. You can find 3GX setup videos on Youtube

ok. let me see.
yes I have a BEC batt.
pit