HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Feb 15, 2013, 04:44 PM
Registered User
United States, CA, San Diego
Joined Feb 2008
40 Posts
Discussion
AR7200BX set-up

I thought that I would share a my experience setting up the Spektrum FBL unit.
I took my time and set it up step by step per instructions. Whenever I was not sure of a setting, I chose the "default setting". The only problem that I en countered was a slight "bobbing" along the pitch axis... very slight... after trying several small changes on Dial #1 , I gave up and called Horizon Hobby. Remember that I said that I chose the "default setting" when in doubt ? Step B in the set-up menu is swash plate servo frequency....I chose the "default setting " of 50 mz....wrong !
I am using Align 410m digital servos, with these servos, 65mz is the proper setting.
Now I have a solid flying 450 T rex.
rcjames1 is offline Find More Posts by rcjames1
Reply With Quote
Sign up now
to remove ads between posts
Old Feb 17, 2013, 07:50 AM
Registered User
freperry's Avatar
United States, VA, Virginia Beach
Joined Feb 2013
23 Posts
Check out the Beastx Site - http://www.beastx.com/service_servoliste.php
for correct servo frequency.
freperry is offline Find More Posts by freperry
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Help with led set up. rkenosha Night Flying 3 Jan 10, 2013 06:03 AM
Discussion Need help setting up Devo 10 w gimbal and f450! floete Multirotor Talk 4 Jan 07, 2013 03:27 PM
Help! Spring/string tail set-up Paul Harvey Hand Launch 4 Jan 04, 2013 05:46 PM
Help! Need help setting up Walkera V120D02S... LucidSoul Micro Helis 6 Jan 04, 2013 10:46 AM
Discussion How do I set up the keychain camera to record video-in? avt FPV Talk 7 Jan 02, 2013 03:37 PM