 |
 |
|
 |
 |
 |
Feb 10, 2013, 05:12 PM
|
|
United States, IL, Edwardsville
Joined Jun 2011
321 Posts
|
Alloy 64mm EDF from HK?
http://www.hobbyking.com/hobbyking/s...ey_3300Kv.html
does anyone have real experience with this unit? What I really want to know is if you flew with a plastic 5-6 blade fan unit and added this was there significant power increase? Or better performance? Did you need to upgrade your ESC? |
|
|
|
|
|
Feb 26, 2013, 04:48 AM
|
|
Joined Dec 2011
113 Posts
|
Go for the 5 blade alloy EDF unit. Its my favorite. Getting nearly 3 minute flights at WOT on a 2200 4s 40c battery.
http://www.hobbyking.com/hobbyking/s..._Version_.html |
|
|
|
|
Feb 26, 2013, 06:13 PM
|
|
|
Canada
Joined Nov 2000
5,183 Posts
|
The 10 blader.. once balanced :-) makes a nice 'whoosh' sound. More like a shop vac than an air raid siren .
10 aggressively pitched blades also means a big enough motor to adequately power the thing and therefore adequate batteries to feed that hungry motor.. Sound comes at a cost.. Only you can decide what you prefer. |
|
|
|
|
Feb 26, 2013, 10:04 PM
|
|
|
Joined Dec 2011
113 Posts
|
Think of flight times
|
|
|
|
|
Feb 27, 2013, 10:41 AM
|
|
|
United States, IL, Edwardsville
Joined Jun 2011
321 Posts
|
I am wanting to use it in my U2 from Hobby People. The planes original setup is 3s with 40amp ESC and 64 mm 5 blade fan BL 4300kv.
I am wondering if it can handle a 4s battery in its stock setup before upgrading motors? Just looking for a better launch and climb out when needed. I am also going to try a 40c discharge battery. The original batteries are 20c. |
|
|
|
|
Feb 27, 2013, 10:09 PM
|
|
|
Joined Dec 2011
113 Posts
|
Change the esc to 50A before you try this and you should go WOT only on bursts.
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Discussion HobbyKing 64mm 10 Blade 3300Kv Alloy EDF Unit | vactrol | Electric Ducted Fan Jet Talk | 22 | Apr 10, 2013 06:46 PM |
| Discussion Review - HK Alloy DPS 64mm 10 blade EDF w/ 3000kv | JGuilty13 | Foamy EDFs | 20 | Feb 28, 2013 03:22 PM |
| Wanted HobbyKing 64mm Alloy EDF 4000kv 850w 4S | JGuilty13 | Aircraft - Electric - Jets (FS/W) | 4 | Jan 23, 2013 12:54 PM |
| Sold HK 2836 3500kv 64mm 14.8v edf motor | VIDEOPRO | Aircraft - Electric - Miscellaneous (FS/W) | 0 | Jan 08, 2013 07:16 PM |
| Discussion Alloy 64mm EDF from EPF Hobby | modisc | Electric Ducted Fan Jet Talk | 0 | Apr 03, 2012 01:21 AM |
|
|