Eclipse 7 problem
Hi.After having problems setting up my new heli,I found that the pitch curves and throttle curves aren't being saved.All other parameters are saved but the pitch and throttle are not. It's in Heli mode with 120deg swash selected.The TX works OK otherwise and all switches and functions work OK.It's a few years old and has given me good service up until now,but I'm a bit reluctant to throw it in the trash can.BTW I reset all the memories but the fault persists.Any one else had this problem or could offer some suggestions?Thanks.
Joined Aug 2002
If a model has been programmed, some changes cannot be made at a later date without a flow on effect, please refer to:
. EPA, ATV, Dual & Triple Rates, Expo Differences & Caution includes ESC / BEC Set Up.
. Hitec Eclipse 7 & Eclipse 7 Pro - FAQ - Setup and Additional Programming
If above does not resolve issue, email direct to:
Hitec Warranty & Service - homepage.
Note: Hitec USA only services North/South America and Canada.
"Hitec USA customer service department is available Monday through Friday*
from 7am- 4:30 pm Pacific time. Reach us at 858.748.8440 or
email@example.com any time you have a question"
• If you are from a country that is outside North and South America, please contact the
Hitec distributor in your country for service.
Alan's Hobby, Model & RC FAQ Web Links
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Question||Hitec Eclips 7 Radio Question||mikefaith||Electric Heli Talk||4||Apr 22, 2005 06:11 AM|
|Futaba 7C vs. Hitech Eclips 7||Trekki||Radios||7||Aug 07, 2004 11:00 PM|
|How to set model memory on an eclipes 7?||j_z_123||Electric Plane Talk||4||Aug 11, 2003 01:55 PM|
|F/S Eclipes-7 (With Spectra Module) Perfect Condition||Lv2Fly||Aircraft - Electric - Airplanes (FS/W)||2||Jan 14, 2003 07:48 AM|
|Hitec Eclipe-7 with Eco-8||curtqn||Electric Heli Talk||6||Jan 07, 2003 11:25 PM|