|Feb 01, 2013, 12:54 PM|
United States, OR, Hillsboro
Joined Nov 2012
Need Help, Issues with old Motor on a P-38
Ok, For starters I had purchased a P-38 2nd hand in great condition, purchased from HK sometime ago.
One of my motors is acting up. Looking into, I have found one of the main power leads of the motor in question with two main lead wires are cut, creating intermittent speed issues at RPM.
I have been trying to find another brushless outboard bell to replace and upgrade to. The motors on my P-38 has no sticker to find it's Kv or model name etc.. I believe it's 1150-1200Kv.
So in my search I found a Turnigy DST Bell 1200Kv but had no dimensions of bell size or shaft. Come to find out it's perfect, but the shaft isn't long enough.
The shaft has to be a "Threaded shaft" and is 2mm in diameter and approximately
1 1/16" in length from the bell end housing of the original motor I need!
The one purchased is roughly 2mm x 3/4".
I removed the shaft alone to see if I could replace just the shaft. No Bueno!
Any ideas or help would be greatly appreciated. I would like to find something that is atleast 1200Kv + motor. But at this point would be happy with stock. HK itmes are all on "Back Order".
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Need help on possible motor heating?||abriosi||Multirotor Talk||2||Feb 01, 2013 04:25 PM|
|Discussion||Need help with elevon mixing on Turnigy 9X radio.||mrebman||Radios||4||Jan 14, 2013 08:45 PM|
|Discussion||P-38 wanting to purchase/ Upgrades! Help/Advice||Mudnyrey||Electric Warbirds||7||Jan 14, 2013 12:23 PM|
|Help!||Need help with T-Motor issue on Naza!!||Arxangel||Multirotor Talk||4||Apr 21, 2012 09:02 AM|
|Question||need motor info for old MAN plans P-38 build||flying jeep||Electric Warbirds||2||Feb 03, 2009 06:32 PM|