Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by Ken59, who may elect to delete unwanted replies.
Old Jan 21, 2013, 08:09 AM
Ken59 is offline
Find More Posts by Ken59
United States, LA, Denham Springs
Joined Jan 2012
411 Posts
DDVP 450 tail

I have built a DDVP and will be testing shortly. It is a very good build and I will be posting vids and pics soon. With a 9ch TX/RX, I can mix it into a pot and run at a constant rate. Motor is a very strong 1700kv which I think, after running a few times, may be way to much for a 450, even at only half throttle. I have a 1500kv to run, also, with testing down to 1200kv to run at WOT. I built the unit with a metal HK tail holder and with a plastic also. I do prefer the metal and looking for the same tail holder at quantity discount. If you read this, let me know via this discussion, a PM, or an email. Thanks!
Ken59 is offline Find More Posts by Ken59
Reply With Quote
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DDVP 450 tail Ken59 Electric Heli Talk 8 Jul 15, 2013 11:15 AM
Discussion 450 Huey DDVP Flight time Scale Helicopters 45 Nov 04, 2011 04:58 AM
Discussion DDVP tail system on a Trex 250 w/crashes McKrackin Micro Helis 38 Mar 13, 2011 04:55 AM
Discussion DDVP tail on Trex 250...SR owners take McKrackin Micro Helis 21 May 30, 2010 03:28 PM