HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jan 18, 2013, 11:03 AM
chopper chopper chopper!!!
Lozki's Avatar
United States, CA, Shasta Lake
Joined Sep 2012
153 Posts
Discussion
Blade 300x new to the fleet

hey everybody what's up just bought my blade300x I've been flying my 130x
For awhile now and been wanting the 300x so bought it, I'm using my dx6i and I was wounding if any of you out their in heli land might have some info maybe you have one or
Had one, any useful info is very much appreciated good...and hopefully not too bad lol thanks...lozki
Lozki is online now Find More Posts by Lozki
RCG Plus Member
Latest blog entry: My Helis
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 18, 2013, 02:10 PM
Registered User
Joined Dec 2005
14 Posts
It is a great heli ... A huge confidence builder, I also bought a 450x
Just make sure you give the motor a drop of motor or bearing oil every 5 to 10 flights or else the motor might fail. I also blow some compressed air on the motor to blow out any dirt ... Hope that helps , happy flying !
Pompedo is offline Find More Posts by Pompedo
Reply With Quote
Old Jan 18, 2013, 03:17 PM
chopper chopper chopper!!!
Lozki's Avatar
United States, CA, Shasta Lake
Joined Sep 2012
153 Posts
Pompedo thanks for the heads up ill have to swoop up some oil just Reg oil for helis?
Lozki is online now Find More Posts by Lozki
RCG Plus Member
Latest blog entry: My Helis
Reply With Quote
Old Jan 18, 2013, 05:39 PM
Axes & Blades-Cutlery & Helis
West Monroe NY
Joined Feb 2009
3,365 Posts
use tri-flow, available at Walmart and off the inter-webb thing

I just picked up a 300x without the 7200bx, for now I am going to use another controller with satellite RX but I hope to pick up a 7200 bx in the next few months. I can't believe how cheap those are used This should be a interesting science experiment using a ZYX-S FBL on the 300X.
ewoodcox is offline Find More Posts by ewoodcox
Reply With Quote
Old Jan 18, 2013, 07:05 PM
chopper chopper chopper!!!
Lozki's Avatar
United States, CA, Shasta Lake
Joined Sep 2012
153 Posts
nice good looking "ewoodcox" tri-flow huh have a walmart on the south side, so your useing a ZYX-S fbl have you used it before?? i see alot of 300x on here most of them have been raped lol beastX is gone then sell then cheap how long have you had your 300x.
Lozki is online now Find More Posts by Lozki
RCG Plus Member
Latest blog entry: My Helis
Reply With Quote
Old Jan 18, 2013, 07:20 PM
Axes & Blades-Cutlery & Helis
West Monroe NY
Joined Feb 2009
3,365 Posts
it shipped yesterday I have the ZYX-S, actually 2, one for a CopterX500 and the other to convert my EXI250....guess the 250 is going to keep the FB for now

This is the guy I picked up, right here on RCG

http://www.rcgroups.com/forums/showthread.php?t=1811020

I picked up the cyclic servos with it so all I have to do is mount the controller, the satellite RX, set it up and start test flying Got everything in the house cept the heli
ewoodcox is offline Find More Posts by ewoodcox
Reply With Quote
Old Jan 18, 2013, 09:39 PM
chopper chopper chopper!!!
Lozki's Avatar
United States, CA, Shasta Lake
Joined Sep 2012
153 Posts
Nice have you done any new servos on your 300x or is it just stock
Lozki is online now Find More Posts by Lozki
RCG Plus Member
Latest blog entry: My Helis
Reply With Quote
Old Jan 18, 2013, 09:54 PM
Axes & Blades-Cutlery & Helis
West Monroe NY
Joined Feb 2009
3,365 Posts
stock tail, 3 Hitec HS5065MG on the cyclic
ewoodcox is offline Find More Posts by ewoodcox
Reply With Quote
Old Jan 19, 2013, 09:11 AM
chopper chopper chopper!!!
Lozki's Avatar
United States, CA, Shasta Lake
Joined Sep 2012
153 Posts
ok ive heard of people taking that stock servos out and up grading them im going to check that out
Lozki is online now Find More Posts by Lozki
RCG Plus Member
Latest blog entry: My Helis
Reply With Quote
Old Jan 19, 2013, 01:09 PM
Axes & Blades-Cutlery & Helis
West Monroe NY
Joined Feb 2009
3,365 Posts
I think I would fly it stock for awhile, unless you are a master 3D pilot you may not notice the difference. Most Blade stuff I have ever had flies awsome out of the box. They really make a good product.... I'm anxious to hear your thoughts when you get to fly yours
ewoodcox is offline Find More Posts by ewoodcox
Reply With Quote
Old Jan 19, 2013, 02:44 PM
chopper chopper chopper!!!
Lozki's Avatar
United States, CA, Shasta Lake
Joined Sep 2012
153 Posts
so do you use oil in your heli ewoodcox you said some thing about the motor is that all i need to oil
Lozki is online now Find More Posts by Lozki
RCG Plus Member
Latest blog entry: My Helis
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Brand new, never flown Blade 300X indoorheli Aircraft - Electric - Helis (FS/W) 7 Jan 21, 2014 11:35 AM
Question Next heli after a Blade Nano CP X? Blade 300X? 450 3D? 450X? Arycon Mini Helis 15 Jun 28, 2013 10:41 PM
Sold Blade 300X With Extras! $110.00 Shipped!! Hobby head Aircraft - Electric - Helis (FS/W) 3 Jan 17, 2013 09:53 AM
Sold Blade 300X Carbon Edge Blades $20.00 Shipped! Hobby head Aircraft - Electric - Helis (FS/W) 3 Jan 16, 2013 10:11 PM
Sold blade 300X, brand new. 290.00 shipped the_master Aircraft - Electric - Helis (FS/W) 3 Jan 16, 2013 05:40 PM