New iCharger 4010DUO Has Been Released! - Page 12

JohnathanSwift · Jan 31, 2013, 09:49 PM

Quote:

Originally Posted by Ohmic

I guess the quality stopped oozing on this thing?

W ell the hardware is first rate. Judgment reserved on firmware.

junsi · Jan 31, 2013, 09:49 PM

Quote:

Originally Posted by JohnathanSwift

But what if the attempt bricks the charger?

And what is the rollover function?

Ok, if you are afraid to fail, you can wait until we release the coming verion V2.02.
Rollover feature, for large log file menu, you can read the data files with the "Knob" select wheel up-down if it goes over a page out, and at the end of the data files it can jump back to the beginning.

Junsi

JohnathanSwift · Jan 31, 2013, 09:50 PM

Quote:

Originally Posted by junsi

Ok, if you are afraid to fail, you can wait until we release the coming verion V2.02.
Rollover feature, for large log file menu, you can read the data files with the "Knob" select wheel up-down if it goes over a page out, and at the end of the data files it can jump back to the beginning.

Junsi

I'll wait!

pm_dawn · Feb 01, 2013, 05:30 AM

Hi Junsi !

Will there be any way of combining programs in to sequences ?

For exampel doing:
1. full charge of battery
2. full discharge of battery
3. measure IR
4. charge xx mah
done

It would help alot when sorting batteries.

Best regards.

BTW i blew my 3010b
seems the 048n06l mosfets died. and diod 22.
I cannot see the numbers on the diod.
Would you please thelp me with the component name.
Or tell me where I can get the charger fixed.
I live in sweden.

Best Regards
/Per

TylerL · Feb 01, 2013, 12:40 PM

I received my replacement charger today and the Jeti spark arrestor seems to do the trick. No spark. Charger powers up just fine. More testing and real world usage to come.

syndr0me · Feb 01, 2013, 01:40 PM

I'm very satisfied by how quickly this unit charges and balances 2S packs.

junsi · Feb 01, 2013, 09:34 PM

Quote:

Originally Posted by pm_dawn

Will there be any way of combining programs in to sequences ?

You can realize it via the saved customized program by users.

Quote:

Originally Posted by pm_dawn

seems the 048n06l mosfets died. and diod 22.
I cannot see the numbers on the diod.

Please check the PM we have sent to you, thanks.

Junsi

ohsnap · Feb 01, 2013, 10:35 PM

have been using the 4010duo for a few weeks now and absolutely love it. having had multiple ichargers in the past (106, 208, 3010) the 4010 is simply amazing. sold off my last pl8 and no regrets, the display is fantastic with so much great info. thanks for another great charger junsi!

Nelvick · Feb 02, 2013, 04:31 PM

The charger is Almost perfect. Will be perfect if can show you in the display the battery % of charge.

JohnathanSwift · Feb 02, 2013, 04:37 PM

Quote:

Originally Posted by Nelvick

The charger is Almost perfect. Will be perfect if can show you in the display the battery % of charge.

This would be great!

TylerL · Feb 02, 2013, 11:41 PM

Yes, WE NEED % of battery pack on the front display!!!

gulio · Feb 03, 2013, 09:33 AM

You would like to read this % when? before starting or during the charge?

mdv · Feb 03, 2013, 03:19 PM

I don't understand the obsession with %. It's never going to be accurate. Voltage is all I care about.

Nelvick · Feb 03, 2013, 03:47 PM

Quote:

Originally Posted by mdv

I don't understand the obsession with %. It's never going to be accurate. Voltage is all I care about.

Cheaper chargers has the future. Why this one not ??

Ohmic · 04:30 PM

Quote:

Originally Posted by mdv

I don't understand the obsession with %. It's never going to be accurate. Voltage is all I care about.

Percentage displayed is just a lookup table based on voltage. Seems to me this should be a user configurable option: voltage, percentage, or both.

Feb 01, 2013, 05:30 AM	#169
pm_dawn Registered User Joined Mar 2011 5 Posts	Possibilities to do sequences? Hi Junsi ! Will there be any way of combining programs in to sequences ? For exampel doing: 1. full charge of battery 2. full discharge of battery 3. measure IR 4. charge xx mah done It would help alot when sorting batteries. Best regards. BTW i blew my 3010b seems the 048n06l mosfets died. and diod 22. I cannot see the numbers on the diod. Would you please thelp me with the component name. Or tell me where I can get the charger fixed. I live in sweden. Best Regards /Per

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Article iCharger 4010Duo - Review	CSpaced	Batteries and Chargers	141	May 04, 2013 06:57 PM
Question What else has Jack been hiding from us?	Newtron	North Coast Electric Flyers	2	Mar 05, 2012 10:09 PM
Suggestion How do I know if my warning point has been retracted	AndyOne	Site Suggestions / Complaints	2	Mar 05, 2012 08:21 AM
Sold message has been deleted	sonicboom24	Cars - Cars and Parts (FS/W)	0	Feb 22, 2012 12:34 PM

RCG Sites

About RCG

Features

Tools

Media

Topics

Feb 01, 2013, 12:40 PM	#170
TylerL Registered User Joined Nov 2003 89 Posts	I received my replacement charger today and the Jeti spark arrestor seems to do the trick. No spark. Charger powers up just fine. More testing and real world usage to come.

Feb 01, 2013, 01:40 PM	#171
syndr0me Registered User Joined Jan 2013 9 Posts	I'm very satisfied by how quickly this unit charges and balances 2S packs.

Feb 01, 2013, 10:35 PM	#173
ohsnap Registered User Renton, WA Joined Jan 2010 76 Posts	have been using the 4010duo for a few weeks now and absolutely love it. having had multiple ichargers in the past (106, 208, 3010) the 4010 is simply amazing. sold off my last pl8 and no regrets, the display is fantastic with so much great info. thanks for another great charger junsi!

Feb 02, 2013, 04:31 PM	#174
Nelvick Registered User Joined Feb 2008 66 Posts	The charger is Almost perfect. Will be perfect if can show you in the display the battery % of charge.

Feb 02, 2013, 11:41 PM	#176
TylerL Registered User Joined Nov 2003 89 Posts	Yes, WE NEED % of battery pack on the front display!!!

Feb 03, 2013, 09:33 AM	#177
gulio That's a funny word NE Ohio Joined Apr 2003 3,662 Posts	You would like to read this % when? before starting or during the charge?

Feb 03, 2013, 03:19 PM	#178
mdv Registered User USA, CA, Encinitas Joined Jun 2009 179 Posts	I don't understand the obsession with %. It's never going to be accurate. Voltage is all I care about.