Originally Posted by PikeStaff

8600g thrust, divided by 6000 watts = 1.43 g/w. That's a really good output; what is the setup, motor/fan?

He's talking about Tam's Dynamax with e HET 800-68 685kv 50mm motor. Now keep in mind this is with 12s 25c 8000 mah.

I would guess Ron's Dynamax setup wiuld be pretty close in power if he ran 8000 mah packs.

The Het has slightly under rated the kv, it is closer to 700, it is a slight copy of the 1915 motor (in my opinion)

Anyone get a price on the Taiwan Tornado 120mm yet? Very curious where it stands as compared to Tams / Schuebeler / StuMax; this is very exclusive territory. If priced comparably, not likely the Tornado is going to make much of a dent in their market.

On the other hand, if it's priced like most of the stuff that comes from there, well....... Would seem some research with other motors could be warranted.

Hi ,

You guys are very good at math and physics.

Yeah, it is definitely the thrust mostly depends on what motor you use.

Please check the video of HET Motor 840KV

TAIWAN TORNADO EDF 120mm 840KV (2 min 51 sec)

We would hear more feedback from you .

Thanks

Almost 16 lbs on 145 amps / 12s. Seems decent to me.

Jack, looking forward to seeing them here in the USA. Who will sell? And do you have price in mind?

To much blade pitch, reminds me of a ramtec.

Originally Posted by PikeStaff

Almost 16 lbs on 145 amps / 12s. Seems decent to me.

Jack, looking forward to seeing them here in the USA. Who will sell? And do you have price in mind?

Hi Roger,

For USA buyers, We have bedrock price(Lower than the price on the market) for 120 mm EDF units, also you guys can buy directly from us .

Thanks,
Jack

Originally Posted by bri6672

To much blade pitch, reminds me of a ramtec.

It is 0.2mm,Forever EDF static balance and dynamic balance blades we made :

TAIWAN TORNADO 使用葉槳測試機6000測試影片 (1 min 2 sec)

Thanks

Hi all,

Brand New Design --Blade Flyout-averting video

Brand New Design --Blade Flyout-averting video (0 min 42 sec)

please dont post vid of you doing that holding in your hand....OMG When will we learn

Originally Posted by turbonut

please dont post vid of you doing that holding in your hand....OMG When will we learn

It is too dangerous , Thanks for the care!

Ha yes!...we cant grow new fingers and eye balls

Originally Posted by turbonut

please dont post vid of you doing that holding in your hand....OMG When will we learn

Looks like you havent seen the tornado demos when they let any one from the crowd hold it in their hands and point it at their face? They are just showing how safe their edfs are and the built in failsafes.

Hehehe here i found one.

Taiwan Tornado EDF from Hobby Expo China, 2012‏ (0 min 16 sec)

Originally Posted by Tornado Jack

Hi all,

Brand New Design --Blade Flyout-averting video

http://www.youtube.com/watch?v=tG-El...feature=relmfu

Please Note:

The video is showcasing the blade is built in safty ,with safety guard mechanism to prevent from blade flying out.

Please dont use your hands do the same experienment on your EDF .

Originally Posted by PAPE

Hehehe here i found one.

http://www.youtube.com/watch?v=5ViiGQNNXP8

Oh!

Tape, you are good at searching information.