|Nov 19, 2012, 07:06 PM|
RMRC 1.3 GHz 200mw First Impressions + Quick Unboxing! + Ground Station Info
Episode 37 of the FPV PROJECT!
This stuff is great! I've tested the vTX all the way down to below 10v and it operates fine. No interference seen from my 2.4 GHz RX onboard the PopWing yet, because I've got the vTX far out on the wing and the torriod ring on the plug.
STAY TUNED + SUBSCRIBE. FLIGHT VIDEOS TO COME SOON!
Music originally composed by my brother, Ben. Track is called "Solar Symphony" - thanks bro!
Check out this new video too from my channel, uploaded after the one above.
|Nov 24, 2012, 07:36 PM|
Hi DJO, Great videos
if your flying 1.2/1.3 nowadays and using a 2.4ghz radio you will need to get a filter for the 1.2/1.3 or the harmonics could make you lose control of the plane at greater ranges.
1.2x2=2.4 aka a harmonic could interfere with the 2.4ghz. Its possible you will never get the right conditions to create the harmonic but if you do it will be alike a brown out and all the controls will lock you out.
I am sure you know this with your technician class radio license just reminding you
Gave you a link I want you to do well and a lock out could destroy your plane
|Nov 24, 2012, 07:40 PM|
I'm going to be swapping over to a UHF system pretty soon for control. I also stay about 9 feet away from the video RX with my DX5e to eliminate interference as much as possible.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||RMRC new digital 900-1.3 rx, 1.3 300mw vtx for sale w/1258||Kloner||FPV Equipment (FS/W)||3||Aug 04, 2012 02:32 PM|
|Discussion||4.3.8 First impressions||JZSlenker||Hoverfly Technologies||11||Jul 19, 2012 10:48 PM|
|Help!||1.3 GHZ bluebeam whip antenna from RMRC||2MacGyver||FPV Talk||31||Jul 18, 2012 12:09 PM|
|Discussion||First impression unboxing stratos from hobbyzone||R2D40||Beginner Training Area (Aircraft-Electric)||2||Jul 05, 2012 06:14 PM|
|Discussion||Unboxing and First Impressions With the Parrot AR.Drone||nikotttin||Multirotor Talk||0||Aug 31, 2010 05:50 AM|