|Nov 19, 2012, 01:20 PM|
DH 9116 Pinion Gear Spec
Is there anyone who knows the pitch of the pinion gear. Its the only piece of the puzzle I don't have. 8-T / 2mm shaft Dia. / pitch ?. I found one on ebay with a 32 pitch. Thought I'd give it a try if the pitch was the same.
|Nov 21, 2012, 11:10 PM|
Below is WRONG.
Closer inspection shows its not any of the pitches that were from
my RC car days.
A 48 pitch 1/10 scale car pinion looks like it meshes but it's slightly off.
Sooo, I don't have a clue.
I will find out. I have every pitch ever made from my RC car days.
I'm guessing it's 48 without looking.
Yup. A 48 pitch pinion and spur I had in my parts box mesh perfectly.
I made a diagram for future reference.
|Nov 27, 2012, 11:55 PM|
Joined Apr 2010
I hesitate to comment - I just know someone here is an expert and won't like this answer.
An easy formula to calculate the pitch is divide number of teeth + 2 by the outside diameter.
A good reference for all the formulas is here.
There's a couple different ways the pitch is given - like on the walkera helis it's given as .4 mod. There's a calculator to convert them here.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Will Mods on DH 9053 Benefit DH 9116||Fuzzyguy||Beginner Training Area (Heli-Electric)||7||Jul 22, 2012 11:28 PM|
|Help! DH 9116 LCD settings question||Sculptor||Beginner Training Area (Heli-Electric)||17||Apr 20, 2012 07:15 AM|
|Discussion dh 9116 or blade 120||lloydd||Mini Helis||3||Mar 31, 2012 08:12 PM|
|Discussion DH 9116 TX has a speed step in throtle||Sculptor||Beginner Training Area (Heli-Electric)||2||Mar 10, 2012 07:42 PM|
|Discussion DH 9116 china model won't fly help.||nick060200||Beginner Training Area (Heli-Electric)||9||Mar 07, 2012 10:18 PM|