*HF-X is a universal camera mount with landing unit for Canon 500-550-600D and Canon 5D MarkII, Canon 7D. Also it will work with other small cameras as well.
*100% aluminum (laser cutting)
*Anodized colored black or red
*Most of the parts are assembled

*Weight (Without servos) : 447gr.
*Max. Width of the camera :180 mm.
*Max. Height of the camera :123 mm.
*$ 209 (Without Servos)

HF-XA two axis camera mount for GoPro,Nex5,Canon 500-550D and other small cameras.
*100% aluminum (laser cutting)
*Anodized colored black or red
*100% assembled
*The kit is ready to install to Xaircraft’s mounting pipes

*Weight (Without servos) :175gr.
*Max. Width of the camera :150 mm.
*Max. Height of the camera :107 mm.
*$189 (Without servos)

for more info: www.fpvcameramount.com
info@fpvcameramount.com

pricey

Hi,
Any videos of the product in use?

Found the videos. Thanks

The Farm (6 min 52 sec)

Jenkins Estate (8 min 29 sec)

Testing HF-XA camera mount with a GoPro Hero 2 (1 min 50 sec)

deneme-2 (0 min 54 sec)

flying camera Canon 5D Gümbet (1 min 30 sec)

How far apart are the holes on the HF- XA?

Originally Posted by Dreaming

How far apart are the holes on the HF- XA?

The holes are 6cm apart to each other.Also the holes diameter is 10 mm.You could find all details on the below pictures.All the holes are suitable for XAircraft for mounting.For the other multirotor we have extra connection equipment also.You could see the connection equipment on the below picture.
Best Wishes
Okan Demirbas

Is it possible to mount a camera on this mount so that the camera is pointing straight down and not straight forward?

Originally Posted by achiii

Is it possible to mount a camera on this mount so that the camera is pointing straight down and not straight forward?

Sorry, but I couldn't understand, What do you mean?