Nov 15, 2012, 03:57 PM
|
|
|
United States, CA, Chico
Joined Dec 2010
308 Posts
|
Skywalker 1900 FPV complete
New build just flown once for trimming. This could be sold complete, or parted-out. Preference goes to complete for obvious reasons. First off, why am I selling... 5 current FPV projects in the shop, and wife says at least one must go. I've not had time to fly this and it really needs someone that will enjoy it. Stock skywalker build with the exception of enlarging motor mount and strengthening it with epoxy along with reinforcing horizontal tail-feathers, small metal skid on bottom of plane and plugging airflow to compartment as positive pressure messes with the RVOSD. this is just tape.
Also has large hatch for mounting your HD video cam such as GO PRO or Contour HD.
For someone wanting to "bind and fly" FPV this just needs your radio w/ ez uhf TX along with lcd/goggles and an RX/patch antenna from RMRC. Or pass on the EZ UHF and mount your own LRS or 2.4ghz control. You definitely could be flying long range FPV the same day. Highest quality "shielded" wires connecting VTX and control RX out to the wings. Setup is extremely RF quiet, insuring the best video, control and reception over long FPV flights. RVOSD mounted with special aerospace high density foam to eliminate any vibration issues and optimize autopilot performance. The build and mods are all a result of lots of testing and logging many hours on my skywalker #1 which I'm still flying today.
equipment-
Power
Hacker A30-10L with 85 amp blue Myst. esc and Castle 10 amp BEC
OSD/autopilot-
RVOSD5 currently running PPM with single wire access to LRS receiver.
Video RX-
new RMRC 800mw 1.3 with the new channel released!! Mounted far out on wing with rubber duck or SPW.
Control-
EZ UHF 8 channel light with dipole antenna out on the wing with PPM mode so wiring kept to minimum run to midship.
Camera-
Hobby Wireless High res. Sony super had CCM, metal case, 600 tvl lines, awesome low light and direct sun performance. Hidden away in nose section currently but could easily be moved up with pan and tilt.
$875 invested. Asking $575 (combo price lowered a bunch) pickup/delivery or plus exact shipping per your preferencee. Shipping as low as $25 via greyhound depending on your proximity to me.
Pricing can also be figured by subtracting the following equipment.
RVOSD -$250
Motor/esc/bec combo -$95
EZUHF receiver -$85
1.3-800 RMRC vtx -$50
600TVL camera -$75
Bare Skywalker is $70 plus actual shipping
PM me for additional pics or questions!! Package will be double boxed and well protected for shipping.
**** Even though the SkyWalker is one of the most popular FPV planes around, it's also a great plane for many other uses including being a giant, fun trainer-parkflyer, glider/thermals, tow-plane, etc.... I have an equivalent Turnigy power system (3536/1200, 50 amp esc, 3 amp BEC) that I can include with the airframe and a spektrum receiver for a total price of $105 plus shipping, giving you a bind and fly plane that's ready to go for a really low cost...
This plane is 3 lbs 9 oz, and Wingspan is 6 feet 3 inches !!!
I will be traveling down to the LA/Orange County/San Diego area for the week of Thanksgiving if anyone down there is interested in a delivery!!!!
|
|
|
Last edited by melsailsnorth; Nov 16, 2012 at 03:22 AM.
|
|