|Dec 28, 2012, 11:13 PM|
I can fully understand where you're coming from but, again, this is a newer, better, CL flying model. And it comes with the stand for the full set plus TX. It's fully RTF. You can get the expansion kit which comes sans the center stand. Nice thing is you can put at least 4 planes on the tether without overturning it while you're flying. And 4 planes in the circle is like a circus while flying. And flying by yourself is a blast too.
|Feb 17, 2013, 02:51 PM|
Sorry I haven't responded lately. I'm just about finished building my hobby shop. Then I have to move all my junk out of the bedroom outdoors to the shop. Then I have to organize everything. A royal pain in the butt but worth it. My wife gets the bedroom back and I get a huge 2 room hobby shop. Can't beat that one.
Here are some things that need to be done with this airplane to make it perform better:
1. Add 3/4 inch in length to the inboard wing. Makes the plane want to put all the weight on the outboard wing so the plane won't want to slop around during flight.
2. Reverse the motors. Put a reverse prop on it. This will keep the line taut at all times.
3. Pe-test for the COG. I think these planes are nose heavy. When they stop they come down nose first unless you're real close to the ground in the first place.
At this point that's all the info I can give you about it. I would get a reverse prop but I don't know how I would apply the snap on button ... yet.
|Oct 27, 2013, 06:08 PM|
I know this thread is 8 months old but I finally decided to share my favorite toy. I had a dareplane stunter when I was a kid and have not seen anything like it since, other than Flyline racers which really aren't that old. Anyway, I decided to make one for myself about 8 years ago. However, my goal was to make it 3D. It'll do just about anything I tell it to do within reason. Loops, flys inverted, hovers, Harriers, wing overs, harrier knife edge and torque roll. Yes, I said torque roll. Unlike conventional CL wire tension is not needed. You also don't need batteries or radios. Just PNF, Plug it into the wall and Fly for as long as you can keep it in the air. Here's a few vids.
I have a lot more video on my youtube channel if anyone is interested.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Flyline Models Vintage Kit NIB Great Lakes Trainer BIPLANE||rockom||Aircraft - Fuel - Airplanes (FS/W)||2||Aug 16, 2012 03:06 PM|
|For Sale||CHARITY DRIVE! Comet, Berkeley & Flyline ALL 3 PLAN SETS FOR ONLY $13.50 SHIPPED!!!!||Plasmajoe||Aircraft - Electric - Airplanes (FS/W)||0||Jul 03, 2012 10:58 PM|
|Sold||CHARITY DRIVE!!!! Comet, Berkeley & Flyline Models Plans $13.50 Total||Plasmajoe||Aircraft - General - Miscellaneous (FS/W)||0||Jul 03, 2012 12:08 AM|
|Sold||CHARITY DRIVE!!!! Comet, Berkeley & Flyline Models Plans $13.50 Total||Plasmajoe||Aircraft - Fuel - Airplanes (FS/W)||0||Jul 03, 2012 12:07 AM|
|Sold||CHARITY DRIVE!!!! Comet, Berkeley & Flyline Models Plans $13.50 Total||Plasmajoe||Aircraft - Electric - Airplanes (FS/W)||0||Jul 03, 2012 12:06 AM|