HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by radioCtlAddict, who may elect to delete unwanted replies.
Old Nov 09, 2012, 09:29 AM
Registered User
radioCtlAddict's Avatar
USA, IN, Kewanna
Joined Mar 2008
42 Posts
Trader Rating: 12
For Sale
Custom R/C Airplane Building Service

Build any plane you can dream of from plans and scale it to the size you want!

I also build those kits or short kits sitting on your shelves. Get-R-Done!!

Select plans here
http://www.matoonline.com/matoAirplanePlans.htm


Building details here
http://www.matoonline.com/planeBuildingPrices.htm

Pictures of other planes I've built here
http://www.matoonline.com/davidsHobbies.htm.

Current schedule here
http://www.matoonline.com/ReservedBuildSlots.htm.

$50 reserves a build slot and goes toward the build cost. It is not refundable. Check, money order, or paypal are acceptable. I charge $300 a month for labor plus materials. Large planes with over 100 inch wingspans take from 4 to 6 months to build. I bill monthly for labor and materials used.
radioCtlAddict is offline Find More Posts by radioCtlAddict
Last edited by radioCtlAddict; Nov 14, 2012 at 10:55 AM.
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 09, 2012, 11:05 AM
SMASH AND DASH :)
hobbiconexstar's Avatar
United States, ME, Bangor
Joined Feb 2011
83 Posts
Trader Rating: 1
Any pica sedan?
hobbiconexstar is offline Find More Posts by hobbiconexstar
Reply With Quote
Old Nov 09, 2012, 11:46 AM
miniture aircraft pilot
rcshirt's Avatar
United States, FL, Tampa
Joined Oct 2007
1,344 Posts
Trader Rating: 80
love the links
rcshirt is online now Find More Posts by rcshirt
Reply With Quote
Old Nov 09, 2012, 01:02 PM
Dir_D_Redd
dirdredd's Avatar
United States, GA, Clayton
Joined Jan 2010
335 Posts
Trader Rating: 81
This Is Outstanding Work!
dirdredd is offline Find More Posts by dirdredd
Reply With Quote
Old Nov 09, 2012, 05:41 PM
Registered User
WesternFlyer's Avatar
USA, AZ, Chandler
Joined Mar 2007
214 Posts
Trader Rating: 142
About how many hours of labor per month could I expect for $300?
WesternFlyer is offline Find More Posts by WesternFlyer
Reply With Quote
Old Nov 09, 2012, 06:52 PM
Registered User
radioCtlAddict's Avatar
USA, IN, Kewanna
Joined Mar 2008
42 Posts
Trader Rating: 12
labor charges

For $300 a month you get at least 10 hours per week, usually more. That's $75 a week or $7.50 an hour for an experienced builder!
So at least 40 hours a month, usually more. Also, you get pictures almost daily of all the builds in progress including yours. The pictures start when you leave a deposit for a build.
radioCtlAddict is offline Find More Posts by radioCtlAddict
Reply With Quote
Old Nov 12, 2012, 08:07 AM
Registered User
billd76's Avatar
United States, PA, Nottingham
Joined Aug 2009
506 Posts
Trader Rating: 3
Wing

I'm in need of a dynaflite PT 19 wing. I have not been able to ifnd templates anywhere. wing span is 89 in. I have plans, but no templates. Can you assist with this wing?
billd76 is offline Find More Posts by billd76
Reply With Quote
Old Nov 12, 2012, 08:33 AM
Registered User
radioCtlAddict's Avatar
USA, IN, Kewanna
Joined Mar 2008
42 Posts
Trader Rating: 12
I found the kit with wing here but it's sold out of course

http://www.philshobbyshop.com/catalo...u?sku=DYFA3020

I can build the wing from the plans. The plans will have enough information to draw the end ribs of a wing half and their positions. I can extrapolate to get the ribs inbetween. I would estimate a month labor or $300 to draw, cut, fit, build the wing. Probably in 3 sections for transport with split flaps and ailerons
radioCtlAddict is offline Find More Posts by radioCtlAddict
Reply With Quote
Old Nov 12, 2012, 08:43 AM
Registered User
radioCtlAddict's Avatar
USA, IN, Kewanna
Joined Mar 2008
42 Posts
Trader Rating: 12
I found this kit for sale.

http://www.rcuniverse.com/market/item.cfm?itemId=881148

radioCtlAddict is offline Find More Posts by radioCtlAddict
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! how to build a R/C airplane? amila_neranjan Beginner Training Area (Aircraft-Electric) 16 Mar 26, 2012 03:48 PM
Discussion C.N.C Machines are not necessary to build R/C airplanes! Mode One The Builders Workshop 38 Apr 20, 2010 01:35 PM
Discussion Millennium R/C is the best at customer service galaxiex Millennium R/C 5 Jul 17, 2008 05:56 AM
Wild R/C has awesome Customer Service!!! flipower Scratchbuilt Indoor and Micro Models 2 Jul 03, 2003 02:37 PM