Yeah, I notice the same thing you're talking about on mine too. I thought maybe the firewall was loose, glued it again and still vibrates.

Kind of a noob question, but what does it mean when the motor is "cogging?"

When the motor bounces back and forth or shutters

Originally Posted by turnerm

I can't seem to get the mount off. It appears to be one with the motor casing.

after you remove the set screws, there is a tiny horseshoe-shaped retainer at the end of the shaft that you can remove with some long nose pliers or tweezers. Hard to explain but easy to do.

No need to remove the C clip. It's just a tight fit. A pair of needle nose pliers and a firm twist and it'll come off. Did mine earlier.

Originally Posted by kuczy

No need to remove the C clip. It's just a tight fit. A pair of needle nose pliers and a firm twist and it'll come off. Did mine earlier.

But now it won't fit the Park 300 because the shaft diameters are different. That Park 280 won't fit over the Park 300.

Maybe this might work for the park 300? http://www.e-fliterc.com/Products/De...rodID=EFLM1157 0?

Originally Posted by slo-fly

Maybe this might work for the park 300? http://www.e-fliterc.com/Products/De...rodID=EFLM1157 0?

Really depends on whether those mounting holes fit to the stock mount. I'm guessing the Park 340 is the same width as the Park 300 which is too wide for the stock mounting "plate"

On a side track note..... How are the servos that come with the plane?

I can't say. Only 6 flights before the motor went south.

Originally Posted by alexjschauer

Alright guys, Model Airplane news is sending me one of these babies to do a review on. I'm only 13
http://www.modelairplanenews.com/blo...shop-aj-slick/
There is my first one.
I am a little nervous on how to approach the QC issues (if they are present).....

They're also sending me a Spektrum Compter radio,(I run the Futaba 8FG)

I'll let you guys know when I have it done, and I would like some feedback from you. I will have to PM it since it is against the rules to post it......
Would like some feedback/suggestions when I'm done!!

P.S. I get to interview QuiQue too

Cool. How did you pull this off?

3D

edge 540qq (4 min 20 sec)

Originally Posted by hone1er

3D http://www.youtube.com/watch?v=X_zQM...ature=youtu.be

Was it windy? Lots of wing rocking!

Originally Posted by TMAC4123

Was it windy? Lots of wing rocking!

It was breezy but not bad. It can get rocking pretty good at times but other times it gets pretty locked into the harrier. I've only been flying mine for a few days so i still have to get used to some things.

Originally Posted by hone1er

3D http://www.youtube.com/watch?v=X_zQM...ature=youtu.be

I went to get rid of a 3d helicopter that has been sitting on my shelf for over a year unrepaired, unused, even though I had the parts. I was going to try to trade for one of these, but they sold out.

I ended up trading $25 cash and the heli for a carbon cub instead. Turns out 3 of the servos were bad, so I am happy. It was a win/win deal. The CarbonCub will be something to goof around with when the flying field is busy, or maybe to take to work and fly around from the roof

But e-flite should thank you for that video...it will help sell a lot of planes seeing what that thing can do...