HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Nov 26, 2012, 10:04 PM
Registered User
USA, CA, Chico
Joined Feb 2011
3,058 Posts
Quote:
Originally Posted by slo-fly View Post
Ok, this is very important info, write it down. The eflm1920 is a 2mm collet that will fit master airscrew props without hub adapters, and apc props. It weighs 2.6g and is 3.99. It also has a little metal nose cone for those that don't want to use the stock spinner. The eflm1935 is a set screw adapter that is very similar to stock, fits the gws and stock props, only has one set screw and weighs 1.3g.
Just ordered these two,,, thanks!!
Airman74 is offline Find More Posts by Airman74
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 26, 2012, 10:08 PM
Registered User
United States, NM, Santa Fe
Joined Aug 2011
411 Posts
Quote:
Originally Posted by Planecraazy View Post
Iv been using a 730mah thunder power pro lite batt and I love it, cg is fine and can't complain about the fast charge times, I started using TP batteries and havnt thought about other brands since, always good performance!

okay good to know

your 730 TP looks to weigh 57g

my 800/850's weigh 69g-- so I think I shall try em soon.


prop adapters
eflm1935 for GWS props and stock prop
eflm1920 for APC and MAS props

I also just ordered both from Quantum Hobby 8.93 shipped for both--they say they ship immediatly.
flyrtim is offline Find More Posts by flyrtim
Reply With Quote
Old Nov 26, 2012, 10:13 PM
Registered User
USA, CA, Chico
Joined Feb 2011
3,058 Posts
Quote:
Originally Posted by Planecraazy View Post
Iv been using a 730mah thunder power pro lite batt and I love it, cg is fine and can't complain about the fast charge times, I started using TP batteries and havnt thought about other brands since, always good performance!
So would I notice much of a difference using this battery
http://www.amainhobbies.com/product_...11V-480mAh-JST
Over my Zippy 500mah 35cs weighing 48G??
Airman74 is offline Find More Posts by Airman74
Reply With Quote
Old Nov 26, 2012, 10:44 PM
"Hey yall watch this"...
Planecraazy's Avatar
United States, NC, Raleigh
Joined Aug 2012
73 Posts
Quote:
Originally Posted by Airman74 View Post
So would I notice much of a difference using this battery
http://www.amainhobbies.com/product_...11V-480mAh-JST
Over my Zippy 500mah 35cs weighing 48G??
I don't have any past experience with zippy batterys, the zippy seems to have a higher c rating .... Close call... Idk....id go with the TP based on my past experience with them.
Planecraazy is offline Find More Posts by Planecraazy
Reply With Quote
Old Nov 26, 2012, 10:54 PM
24 yrs. of Aircraft flying
epoweredrc's Avatar
United States, GA, Rockmart
Joined Oct 2004
5,720 Posts
Quote:
Originally Posted by Planecraazy View Post
Iv been using a 730mah thunder power pro lite batt and I love it, cg is fine and can't complain about the fast charge times, I started using TP batteries and havnt thought about other brands since, always good performance!
That's good to know and Thunder power are great batterys. I like Gen ace also. Billowy also.I am good with 4 minute flights so I shouldn't need any big batterys
epoweredrc is online now Find More Posts by epoweredrc
Reply With Quote
Old Nov 26, 2012, 11:18 PM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
I love the thunder power 325mah 65c, 12c charge rate, 35.5g and I'm still getting 4-5 minute flight times with a tad to spare.
slo-fly is offline Find More Posts by slo-fly
Reply With Quote
Old Nov 26, 2012, 11:28 PM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
You'll need a .05" standard allen wrench for the set screws on the stock prop adapter.
slo-fly is offline Find More Posts by slo-fly
Last edited by slo-fly; Nov 26, 2012 at 11:55 PM.
Reply With Quote
Old Nov 26, 2012, 11:44 PM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
Here's some more really good info for those using the gws props, the eflite prop adapter part number eflm1935 has a slightly longer shaft than the stock adapter. This allows you to fit a gws prop without sanding the hub.
slo-fly is offline Find More Posts by slo-fly
Reply With Quote
Old Nov 26, 2012, 11:53 PM
Registered User
United States, NM, Santa Fe
Joined Aug 2011
411 Posts
Quote:
Originally Posted by slo-fly View Post
You'll need a .05 standard allen wrench for the set screws on the stock prop adapter.
.50mm ?
flyrtim is offline Find More Posts by flyrtim
Reply With Quote
Old Nov 26, 2012, 11:54 PM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
.05"
slo-fly is offline Find More Posts by slo-fly
Reply With Quote
Old Nov 26, 2012, 11:58 PM
Registered User
United States, NM, Santa Fe
Joined Aug 2011
411 Posts
Quote:
Originally Posted by slo-fly View Post
.05"
.05" on stock prop adapter, got it

what sizes wrench on other adapters please?
flyrtim is offline Find More Posts by flyrtim
Reply With Quote
Old Nov 27, 2012, 12:12 AM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
The eflm1935 has one set screw that is also .05". The eflm1920 is collet with no set screws, there is a hole in the metal nose cone to stick a small screwdriver or allen wrench to tighten.
slo-fly is offline Find More Posts by slo-fly
Reply With Quote
Old Nov 27, 2012, 12:16 AM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
Here's what the eflm1920 2mm collet adapter looks like with an apc 7x4E prop.
slo-fly is offline Find More Posts by slo-fly
Reply With Quote
Old Nov 27, 2012, 12:28 AM
certified crash instructor
Scottsdale Arizona
Joined Dec 2009
2,212 Posts
Here's the eflm1935 set screw adapter with unmodified gws prop. The stock nose will fit this adapter too, just need a little nose cone trimming.
slo-fly is offline Find More Posts by slo-fly
Reply With Quote
Old Nov 27, 2012, 05:23 AM
Registered User
mygeneration's Avatar
United Kingdom
Joined May 2012
212 Posts
Quote:
Originally Posted by Airman74 View Post
Did I mention how cool the GWS 7x3.5 ORANGE prop looks?????
:-)
Did i mention i've got 5 gws orange props on my table!
But "STILL" no plane yet
Was hoping to collect one from LHS today, looks like that's not gonna happen, still not in stock!
Cheers
mygeneration is offline Find More Posts by mygeneration
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product E-flite 300 A6M5 Zero BNF Basic Afraidtoregister Electric Warbirds 1037 Jul 18, 2014 06:59 PM
Sold BNIB E-flite UMX Beast 3D BNF Basic AS3X (EFLU4850) plus EXTRAS peterswolf Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 4 Sep 14, 2012 07:43 PM
For Sale E-Flite MSR X BNF Basic edition daign Aircraft - Electric - Helis (FS/W) 0 Jun 01, 2012 08:59 PM
Sold Edge 540 3D ARF by E-Flite freirem Aircraft - Electric - Airplanes (FS/W) 2 Feb 28, 2012 06:38 PM
Discussion A6M5 Zero 300 BNF Basic by E-flite BlazingStar Micro Ready-to-Fly 2 Feb 03, 2012 02:22 AM