Protect your DJI NAZ GPS. I have personally lost one GPS to a roll over crash. This device is designed to break off in hard crashes that hit the gps gaurd. It has one stainless steel bolt that hold the pieces together. You can mount it with one stainless steel bolt from underneath.

The device also is designed to manually rotate to allow for magnetic declination adjustments

In the case of a rollover crash the device hits on the guarded area around the GPS compass and if the crash is hard enough the guard snaps off of the stand for protection. The bottom of the guard is 5mm thick abs plastic the sides are solid ABS plastic. I can make these in black or white

2 inches tall from top to bottom

$10 shipped in USA ( I am shipping over seas but the shipping has to be paid by the purchaser
$5 shipped for replacement parts in the USA (ie the guard has been snapped off from crashing)

Because I make them with my 3D printer I can also make them different lengths if needed





Some are actually getting very good results with shielding the inside with copper

Paypal wdelarme@gmail.com

Patent Pending

I just put mine on and it fits great. It is so easy to adjust, I dialed my GPS in perfectly in a minute. No problem with locking on to the sats, 2" height works fine.

should be getting mine in the mail next couple day, cant wait thanks again for this clever product

Did you have any issues with the bolts I used?

I'm thinking about using 3mm bolts instead of the 4-40 3/32 head bolts

The bolts are quite tight. That is probably a good thing, but the bottom one can be tough to deal with. Not sure if 3mm will improve that, but i seem to use 3mm a lot and only 4-40 for Rusty's frame bolts. 3 mm may be more common in this area and everyone has mm tools.

Originally Posted by azred

The bolts are quite tight. That is probably a good thing, but the bottom one can be tough to deal with. Not sure if 3mm will improve that, but i seem to use 3mm a lot and only 4-40 for Rusty's frame bolts. 3 mm may be more common in this area and everyone has mm tools.

+1, as I already mentioned, the bolt gave me a hard time. Other than that, it's a great product which solved my TBE problem once and for all and gives me some piece of mind. Signal is still perfect with 2 in pole.

Buy with confidence guys!

Originally Posted by jamac

+1, as I already mentioned, the bolt gave me a hard time. Other than that, it's a great product which solved my TBE problem once and for all and gives me some piece of mind. Signal is still perfect with 2 in pole.

Buy with confidence guys!

Just keep in mind the allen head is 3/32 and the screw is a 4-40 stainless

Originally Posted by wdelarme

Protect your DJI NAZ GPS. I have personally lost one GPS to a roll over crash. This device is designed to break off in hard crashes that hit the gps gaurd. It has one stainless steel bolt that hold the pieces together. You can mount it with one stainless steel bolt from underneath.

The device also is designed to manually rotate to allow for magnetic declination adjustments

In the case of a rollover crash the device hits on the guarded area around the GPS compass and if the crash is hard enough the guard snaps off of the stand for protection. The bottom of the guard is 5mm thick abs plastic the sides are solid ABS plastic. I can make these in black or white

2 inches tall from top to bottom

$10 shipped in USA ( I am shipping over seas but the shipping has to be paid by the purchaser
$5 shipped for replacement parts in the USA (ie the guard has been snapped off from crashing)

Because I make them with my 3D printer I can also make them different lengths if needed

Attachment 5201383

Attachment 5201384

Some are actually getting very good results with shielding the inside with copper

Paypal wdelarme@gmail.com

Patent Pending

Hi,
I would like to order this item. Could you confirm that you can ship overseas (French Polynesia). I can use paypal for payment.
Thank you

I will for $8.00 shipping + $10.00 each . Please include in paypal payment any specifics how many you want etc

Originally Posted by yaktork

Hi,
I would like to order this item. Could you confirm that you can ship overseas (French Polynesia). I can use paypal for payment.
Thank you