Rubber tap washers will work in place of the other style feet if you cannot find them/similar , plenty of sizes available in your local DIY shop.

Originally Posted by Firepower

Anyone know if reversing the wires of the motor will wreck anything, as one is going the wrong way? Air blows up with correct prop.

I've done it on the Hubsan and the Syma and it worked fine....

Originally Posted by scousethief

Rubber tap washers will work in place of the other style feet if you cannot find them/similar , plenty of sizes available in your local DIY shop.

Do you have a pic?

Originally Posted by craigiri

I've done it on the Hubsan and the Syma and it worked fine....

Thanks I'll try that as it is easy.

EDIT: I put the black wire on the positive and I actually got it flying for a short time which seems strange I had to change the wire around.
The motor is still getting hot, LIPo flat and prop coming off but will get back to it soon but is looking good.

Lost one rear prop other day. My wife found it and installed but knicks prop off. Used some model cement easy and it held fine. Then wacked llamp and broke both rear blades. Bang good has them but its new years over there. I used U816 on lost prop but quad motor got warmer than others and stoped using it. I fly quads alot and never broke a blade. Bent a few but still useable. I wonder if Ladybird props will work till I get replacement Husban props. I like the shape of Husban. Are props sold here in USA with reasonable postage ??

Just installed Ladybird props all the way around and flys very well. I think even better than stock blades.

Originally Posted by neobot

how about this instead mpu6050 instead of mpu3050 in hubsan x4, already setup for multiwii, you can turn auto leveling on and off,

http://www.goodluckbuy.com/mini-micr...ard-only-.html

I don't have one, but have two X4 and a extra circuit board for X4 on the way from BG!

Originally Posted by bangkomit

Well done! Precision, beauty and tiny!

Hey missing PART 2, very nice

Originally Posted by hudibras

Hey missing PART 2, very nice

found his video (badlands) from fpvhub.com

FPV Hubsan X4 Part 2 (3 min 51 sec)

Originally Posted by dankar04

Lost one rear prop other day. My wife found it and installed but knicks prop off. Used some model cement easy and it held fine. Then wacked llamp and broke both rear blades. Bang good has them but its new years over there. I used U816 on lost prop but quad motor got warmer than others and stoped using it. I fly quads alot and never broke a blade. Bent a few but still useable. I wonder if Ladybird props will work till I get replacement Husban props. I like the shape of Husban. Are props sold here in USA with reasonable postage ??

Just installed Ladybird props all the way around and flys very well. I think even better than stock blades.

MassiveRC carries stock props and others.

hi i am new and I would like to order a Hubsan x4, but I have a question, has the Hubsan an indicator when the battery is low? please help me with this doubt

Originally Posted by RyoKen

hi i am new and I would like to order a Hubsan x4, but I have a question, has the Hubsan an indicator when the battery is low? please help me with this doubt

The blue LEDs flash when the battery gets low

Originally Posted by scotsoft

The blue LEDs flash when the battery gets low

Thanks

Well my new motors, props and V939 board. Amy today, soon up, my X4 bodied V939 and a new motor replacement tutorial!]

Originally Posted by bangkomit

found his video (badlands) from fpvhub.com
http://www.youtube.com/watch?v=5tTv8CRLvrE

wonder if he flys this outside his neighbours bathroom window..lol

Just wondering if anyone knows where to order hubsan x4 motors for cheap in the US?