Quadrino with Walkera Devo 10 and RX1002?

IridiumFox · Oct 01, 2012, 01:26 AM

Hi all:

I am new to quadcopter building and just finished putting all the hardware together with a local group on DJI F450 with Quadrino Multiwii V1E (Gen 2) Flight Controller. I have an existing Devo 10 and it flies fine with QR Ladybird. Got a spare RX1002 so I wanted to install it for the DJI.

I got as far as power-up the quad and the usual start-up confirmation sound from the FC. I then turn on the Devo 10 and the RX1002 then would go from blinking to steady light just like when my Ladybird confirms the bind and ready to fly. But nothing I on the TX triggers and response.

Since everyone else uses the Spektrum DX6i or DX8 with AR6210, none can offer the technical assistance. Anyone here have the Quadrino and RX1002 setup? Can you share how you plug the wires?

JWinNewPhila · Oct 01, 2012, 08:33 AM

Go post in the "Quadrino" thread under Multirotor Electronics and I'm sure DoctorAudio will help you get it all set up.

Quadrino Thread

With the hobby grade quads you always want to turn your transmitter on FIRST then turn on the quad. Your not getting anything because you have to "ARM" the board using the sticks or a switch on your transmitter.

But there are quite a few things that you need to do before you are ready for that!
Like I said.... Get a hold of DocAudio and I'm sure he will get you on track! He seems like a great guy who truly wants to help the new guys enjoy the hobby.

Oct 01, 2012, 01:26 AM	#1
IridiumFox Registered User United States, CA, Newport Beach Joined Aug 2012 20 Posts	Quadrino with Walkera Devo 10 and RX1002? Hi all: I am new to quadcopter building and just finished putting all the hardware together with a local group on DJI F450 with Quadrino Multiwii V1E (Gen 2) Flight Controller. I have an existing Devo 10 and it flies fine with QR Ladybird. Got a spare RX1002 so I wanted to install it for the DJI. I got as far as power-up the quad and the usual start-up confirmation sound from the FC. I then turn on the Devo 10 and the RX1002 then would go from blinking to steady light just like when my Ladybird confirms the bind and ready to fly. But nothing I on the TX triggers and response. Since everyone else uses the Spektrum DX6i or DX8 with AR6210, none can offer the technical assistance. Anyone here have the Quadrino and RX1002 setup? Can you share how you plug the wires?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Product Walkera DEVO 10	FDR_	Micro Helis	464	May 14, 2013 07:41 PM
Discussion Walkera Devo 10/RX 2703-H-D Setup Info Needed	iflyhelis	Radios	15	Feb 24, 2013 11:01 AM
Mini-Review Walkera Hoten X Review - Devo 10 Transmitter - UP02 Upgrade Tool/UP-02 Adapter	Tom Z	Mini Multirotors	19	Nov 12, 2012 09:14 AM
Sold Walkera devo 10 with receiver	vewdew	Aircraft - General - Radio Equipment (FS/W)	0	Jul 11, 2012 03:33 PM
Question How has been your experience with Walkera Devo 10?	BenHayat	Multirotor Talk	2	May 22, 2012 03:34 PM

RCG Sites

About RCG

Features

Tools

Media

Topics

Oct 01, 2012, 08:33 AM	#2
JWinNewPhila Registered User United States, OH, New Philadelphia Joined Jul 2012 57 Posts	Go post in the "Quadrino" thread under Multirotor Electronics and I'm sure DoctorAudio will help you get it all set up. Quadrino Thread With the hobby grade quads you always want to turn your transmitter on FIRST then turn on the quad. Your not getting anything because you have to "ARM" the board using the sticks or a switch on your transmitter. But there are quite a few things that you need to do before you are ready for that! Like I said.... Get a hold of DocAudio and I'm sure he will get you on track! He seems like a great guy who truly wants to help the new guys enjoy the hobby.