I have a used Scorpion 2208-34 motor for sale. This was used as a demo and there is some cosmetic damage to the case from being transported to shows. I ran it up on the bench and the motor ran up fine but I will offer a 30 day refund on this motor. I also installed a new shaft as a precaution.

These sold for $32 new and I would like $20 shipped.

Details are here: http://www.scorpionsystem.com/catalo...22/S-2208-34T/

Specifications
Stator Diameter 22.0 mm (0.866 in)
Stator Thickness 8.0 mm (0.315 in)
No. of Stator Arms 12
Magnet Poles 14
Motor Wind 34 Turn Delta
Motor Wire 4-Strand 0.19mm
Motor Kv 1150 RPM / Volt
No-Load Current (Io/10V) 0.45 Amps
Motor Resistance (Rm) 0.191 Ohms
Max Continuous Current 12 Amps
Max Continuous Power 130 Watts
Weight 40.0 Grams (1.42 oz)
Outside Diameter 27.9 mm (1.097 in)
Shaft Diameter 2.97 mm (0.117 in)
Body Length 24.95 mm (0.982 in)
Overall Shaft Length 43.3 mm (1.706 in)
Max Lipo Cell 3s
Motor Timing 5deg
Drive Frequency 8kHz

Thanks, Mike

I will take it Do you have a motor mount for it ?

Sold pending payment.

Mike