 |
 |
|
 |
 |
 |
Sep 09, 2012, 02:20 PM
|
|
|
United States, CT, Hartford
Joined Aug 2010
13 Posts
|
HV ICE2 outrunner mode or 12Khz switching
I am using a hacker A50 turnado 10 pole out runner on a large EDF Byron f-16 with Byron fan146mm with an ICE2 HV 160 controller. which is better for switching freq, out runner mode ( the settings are not defined) or the formula from castle kv x pole count x nominal volt / 20 and round down. So 580 x 10 x 46.8 / 20 = 13573 down to 12khz
and while we are at it timing low ,med ,high? thanks for your help |
|
|
|
|
|
Sep 10, 2012, 09:54 AM
|
|
Clyde N.C.
Joined Oct 2003
509 Posts
|
I personally would recommend the 12khz
Steve |
|
|
|
|
Sep 10, 2012, 10:37 AM
|
|
|
Ontario, Canada
Joined Sep 2009
423 Posts
|
PWM 12kHz, timing Low
|
|
|
|
|
Sep 10, 2012, 05:12 PM
|
||
|
United States
Joined Feb 2001
16,136 Posts
|
Quote:
. |
|
 |
|
|
|
Sep 10, 2012, 07:24 PM
|
|
|
United States, CT, Hartford
Joined Aug 2010
13 Posts
|
OK thanks! to all who replied, 12khz switching and low timing it is
|
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mini-HowTo Turnigy 9x v2 standard firmware, mode switch 3 position switch for dji naza gps :) | stein3247 | Multirotor Electronics | 3 | Jul 20, 2012 04:23 AM |
| Discussion Mode 1, Mode 2, Mode 3 or Mode 4? | rexless | Beginner Training Area (Heli-Electric) | 21 | Jul 19, 2012 10:42 PM |
| Sold Castle Creations HV ESC's: Ice2 60HV (new), Ice2 80HV (new), 85HV (used), 110HV (new) | jgalexander | Aircraft - Electric - Power Systems (FS/W) | 11 | Apr 26, 2012 07:26 AM |
| Sold E-Flite 30-Amp Pro Switch-mode BEC Brushless ESC and PKZ BL 15 outrunner | MNMadman | Aircraft - Electric - Power Systems (FS/W) | 1 | Oct 05, 2009 03:47 PM |
| How's the gov mode on CC45 HV for outrunners? | msg73 | Castle Creations | 1 | Aug 02, 2005 06:36 PM |
|
|