Semi Rcexplorer frame
Gws park hpx tail servo.
Ipeaka IQ 30 amp ESC
Zippy flight max 3300mah 4s (with 9x4.7 prop)
Turnigy 3000mah(with 10x4.7 and 10x5e)
Exceed RC rocket3015 1020kv motors
Aluminum arms
AUW of 1100grams

Originally Posted by harryarnold

why thanks for the complement. however, the unwarranted personal attack on my character will draw a report.

its amazing how people spread slander. I wont respond here but please

start a thread or inbox me if youd like to chat about something other than multirotor designs.

looks like you picked the wrong bunch of folks hu harry?
yea most of us here are good honest folk with good moral value's
witch is more than i can say for some

Sweet Vibration mount! While it lasted....
She took a branch to the face.

So I had some free time to day so I put this together

DUDE!!!! That looks awesome. Details please and more pics

RC, What type of monstrosity is this ?!!?



I always thought screw the CD casing and Tupperware and use car body shells for your covers.

Originally Posted by speedactyl

RC, What type of monstrosity is this ?!!?



I always thought screw the CD casing and Tupperware and use car body shells for your covers.

Ok I want to see that flying

the shell isnt mines and this was a test fit to see whether this Idea would be feasible. but would re-visit it again when I got my own shell to mod as cover. that way my Quad wont be too boring..

it may or may-not look like this

Originally Posted by speedactyl

I always thought screw the CD casing and Tupperware and use car body shells for your covers.

I am building a shratchbuild right now that will be using the Associated b4.1 body like the one in the pic here but with my own custom airbrush scheme and ill prob throw in a pilot for good measure.

Originally Posted by jasonmbiggs

DUDE!!!! That looks awesome. Details please and more pics

Where you talking to me

Oh, sorry Tech69x. Yes. I really like your quad. It's very clean

Why thank you sir. I will get some more pic up

A few spec's 430 mm motor to motor center plate and motor mounts and landing gear cut from .062 g10 arms made from 3/4in aluminum coated. Motors ipower 1000kv esc's 30amp flashed

Originally Posted by tech69x

A few spec's 430 mm motor to motor center plate and motor mounts and landing gear cut from .062 g10 arms made from 3/4in aluminum coated. Motors ipower 1000kv esc's 30amp flashed

ESC's are inside the arms?

cheers,
Andrew

Originally Posted by Banjo5

ESC's are inside the arms?

cheers,
Andrew

30A ESC's are too big to fit inside 19mm arms.

My guess is they are under the center cap or not installed yet.