Originally Posted by Jboyyy

Anyone go flying today?

I did. Flew my pkz extra. Love that thing!

Yup like with me and the-DreamFactory, my kits will only cost around £25-30 (around $35-$42) a pop plus shipping and they will include all laser cut parts, hardware, some extra parts incase you crash (mostly noses) and an nice chinglish free manual with lots of step by step pictures.

My current lineup of kits will include my ~Banshee F3P (825mm span) and my *Atom 3D bipe (720mm span)

*in Prototyping phase
~in testing phase

K

Zebtqb I love your idea for pnp foam board planes. I'd probably end up buying something depending on the prices. 3D of course, anything else wouldn't be fun. Personally I think that some designs that might get you known are: A 3D thrust vectored jet, that'd be a lot of fun and they are not widely available. High wing 3D planes are always cool and look amazing when they're really flying. If you made a smaller size of Mac Hodges 3D bomber I think EVERYONE would buy it. Also if you want to sponsor someone to help get your planes out there well then *raises hand*

I'm sure this is going to sound like a stupid question, but is it possible to change these connectors to deans? I have very little soldering experience

I actually have a 3D high winger in the design stages...

Hmm a 3D B29 we shall see! if i were you i'd grab some popcorn.

Leave the little ones the JST like they are. And yes the big one can be changed. Deans are the best and JST is basically a baby dean

Originally Posted by Jboyyy

I'm sure this is going to sound like a stupid question, but is it possible to change these connectors to deans? I have very little soldering experience

Originally Posted by Jboyyy

I'm sure this is going to sound like a stupid question, but is it possible to change these connectors to deans? I have very little soldering experience

Yes, you can chop the plugs and solder on new ones or make / buy an adapter

Originally Posted by dskuro95

Leave the little ones the JST like they are. And yes the big one can be changed. Deans are the best and JST is basically a baby dean

I kind of need the connectors to be deans for my charger, is it possible to change the jst or no?

Originally Posted by Keenan smith

I actually have a 3D high winger in the design stages...

Hmm a 3D B29 we shall see! if i were you i'd grab some popcorn.

If shipping from London wasn't so expensive I'd make you send me one

Originally Posted by Jboyyy

I kind of need the connectors to be deans for my charger, is it possible to change the jst or no?

You could, but I would just buy this: https://www.gravesrc.com/ProductDeta...RCAFINALCHARGE
Allows you to charge anything know to the normal hobbiest.

Originally Posted by Jboyyy

I kind of need the connectors to be deans for my charger, is it possible to change the jst or no?

Just make an adapter for your charger. Its much safer that way..

or just get this!

http://www.hobbyking.com/hobbyking/s...apter_Set.html

Originally Posted by cale10

or just get this!

http://www.hobbyking.com/hobbyking/s...apter_Set.html

+1

Airsoft was awsum

Ugh I wish the snow would go away I've had enough skiing i wanna fly

Originally Posted by Jboyyy

If shipping from London wasn't so expensive I'd make you send me one

Actually shipping from london is like the cheapest in the world, i'm pretty sure shipping would only be around £10 ($16) so if ya like after i finish testing my banshee then i'll see what can be done (you pay shipping only) but i'd probably have A.D test them first since he's only 6miles from me