|Nov 12, 2001, 04:08 PM|
Need for Speed, 480 race bb timing?
I have herd some mention of "timing" Speed race 480 brushed motors. Dose this mean clocking the can against the armature to advance the timeing for better high RPM performance like on a car?
If so, how far do I take it? It makes sense for EDF purposes to maximize higher RPM performance. Whats the deal, can any one give me the how to cliff notes?
Thanks to all!
|Nov 13, 2001, 12:29 AM|
San Diego, CA
Joined Feb 2001
Just scribe a mark from the case through the end bell so you have a reference to the original timing. Loosen the end bell screws and advance the end bell about 3/32 to 1/8 of an inch from the original location. This was demonstrated to improve dyno efficiency (see Steve Neu's S&E modeler column a few issues back) and visibly reduces brush arcing at higher voltages. My XB-70 is running (3) in series off 27 cells or 9 cells per motor.
Good Luck to you,
Steve Manganelli AKA Prof. Maneuver
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Graupner Speed 480 Race BB motor||Twmaster||Aircraft - Electric - Power Systems (FS/W)||1||Jul 11, 2006 06:04 PM|
|For Sale Graupner 6327 Speed 480 Race BB motor with a 2.5 to 1 planetary gearbox||Joe Elston||Aircraft - Electric - Airplanes (FS/W)||5||Feb 16, 2003 09:10 PM|
|Gear/prop combo for speed 480 BB Race motor||Kjelli||Foamies (Kits)||17||Sep 20, 2001 08:37 AM|
|Need a good price for Speed 480||baconfingers||Electric Plane Talk||6||Jul 05, 2001 09:33 AM|
|Help! How do I retime my 6327 Graupner Speed 480 race motor for a gearbox.||Joe Elston||Electric Plane Talk||6||Apr 20, 2001 11:56 AM|