I have a 48'' Extreme Flight Edge for sale, just the airframe and servos. It is the red, yellow, and black scheme with a 85MG in the elevator and 65MGs everywhere else. I have broken the landing gear and broke a small spot on the elevator. Both were repaired(LG with epoxy and elevator with CA)and the plane was flying great until i burned my omega 130 up(EDIT:I found out this morning the omega is fine. I opened it up and there was some metal shavings causing the noise that i thought meant the motor was done. I cleaned it up and got 6 flights on the plane this morning, all is working great )

The plane only has about 40 flights on it but if you are a perfectionist this plane is not for you. It doesn't look bad but it is not perfect which i know some folks expect. There are air bubbles in the decals and i have some white covering on the bottom of the plane by the landing gear because that's all i had for the repair. It can easily be removed and replaced with black. There are also some other imperfections but the plane flies perfect and is a GREAT 3d plane(In the sky the only imperfection you can see is the white covering). If i wasn't saving for a MXS i'd keep it but sadly it must go


If you want it you can have my 3DHS 47'' SHP for free with this plane. It needs a new motor box and landing gear. Just the airframe

Airframe=$179.95
Omega 130g motor=59.99
ztw 70a esc=48.00
3x65MG=$77.58
1x85mg=$30.99
1x4s 2500 25c gens ace
=$421.69+shipping

I'm asking for $300 LPU in SF/Oakland bay area.




P.S. my computer reversed my photos for some reason

I wish more people flew in my area. Come on guys buy one get one...BOGO who doesn't love a good BOGO deal

pm sent

Sale pending inspection of plane.