HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Nov 12, 2001, 10:14 AM
OCD
Wright's Avatar
King, NC
Joined Aug 2000
485 Posts
LRK Brushless kit, anybody interested

Sport flyers,

I am sure some of you have seen reports on the homebuilt LRK brushless motor on the ezone. I like to build things so I have decided to push myself. I have been in contact with Peter Rother from Germany concerning a partial kit for the LRK brushless motor.

The motor is an outside runner with high torque (fixed stator with rotating outside magnets), Actro like. The kit they are offering will produce up to 600W (maybe more) according to its windings and stator length. I am looking at the 500 to 600W version. You also need a sensorless brushless controller.

They are offering a kit for CNC parts at 150 to 170 DM, this translates to about 70 to 80 US dollars. The magnets, stator, wire, adhesive, etc must be purchased (about $50). There are German suppliers listed on Peter's web site. It would be nice to find some US suppliers, anybody know of any?

If any are interested we could place one order for the kit and supplies. See the web site for more information:

Kit offer:
http://www.aerodesign.de/peter/2001/...ml#Anker495562

First publication:Part I
http://www.aerodesign.de/peter/2001/...4-2000_eng.htm

Second Publication:Part II
http://www.aerodesign.de/peter/2001/...1_2001_eng.htm

Marcus
my new email: wrightmw@wfu.edu
Wright is offline Find More Posts by Wright
Reply With Quote
Sign up now
to remove ads between posts
Old Nov 19, 2001, 05:53 PM
homo ludens modellisticus
Ron van Sommeren's Avatar
The Netherlands, GE, Nijmegen
Joined Feb 2001
10,693 Posts
Marcus' other thread (pictures!!!) about lkr-torquemax motors:
http://www.rcgroups.com/forums/showt...threadid=17297

lrk-torquemax e-mail discussion list:
www.yahoogroups.com/group/lrk-torquemax/

If you read German, very good lrk-torquemax discussions here:
For those of you who can read German, this lrk-torquemax forum,
www.rconline.net -> forum -> lrk-motoren
Ron van Sommeren is offline Find More Posts by Ron van Sommeren
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
CNC foam cutter electronics kit--anyone interested? fregon45 Foamies (Kits) 14 Jun 11, 2008 12:02 PM
Anybody interested in Mini Graphite?? xadmin Aircraft - Electric - Airplanes (FS/W) 13 Nov 17, 2002 09:03 PM
Pretty-CNC cut kit, anybody interested??? modest-master Parkflyers 15 Oct 18, 2002 07:12 AM
LRK brushless motor kit Wright Power Systems 17 Nov 22, 2001 07:22 AM
anybody interested in an electric r/c truck? petn7 Aircraft - Electric - Airplanes (FS/W) 11 Sep 24, 2001 06:34 AM