Originally Posted by aeromaniac

I would love to Gazza but I have already tried a 50gram motor and found it impossible to get the CofG back, without adding heaps of nose weight and I hate nose weight lol.

can u just run a bigger battery?

Fantastic news! So that means I'll align my motor pointing slightly upwards on mine to totally remove the diving effects. Will post pics of my motor mounting mods.

Thanks a lot.

Foo

Originally Posted by gazza2003au

can u just run a bigger battery?

lol i wish, not enough room it stops the hatch from going on.

Originally Posted by aeromaniac

lol i wish, not enough room it stops the hatch from going on.

wow from the pics the batt compartment looked huge! could u possibly run 2x 2S in parallel?

Originally Posted by gazza2003au

put this motor on it and it'll do 140mph http://www.hobbyking.com/hobbyking/s...arehouse_.html
happy times lol

I have been thinking about that one for my Funjet, atm it has the turnigy 2350kv in it.

Originally Posted by gazza2003au

wow from the pics the batt compartment looked huge! could u possibly run 2x 2S in parallel?

1800 3s just squeeze in but 2200 are to thick.

That means ' junglegym' must have sanded the battery area since he managed to squeeze in a 4S 2200mah into his.

I will try fitting a 2200mah 3S on mine later.

Foo

try the new zippy compacts guys there much smaller batteries whats the width of battery u can shove into one of these wings?

It is said that a picture is worth a thousand words, so try this on for size lol.

Originally Posted by aeromaniac

It is said that a picture is worth a thousand words, so try this on for size lol.

thats crap loads of room i would be tossing the 140mph motor on and chuck in a 4S lipo and hold on to ya knickers

Slip a 2200 3s in and you can't get the lid on?.

So that's what that big round piece of metal is for. Was wondering what the heck it was for.

these are 24mm high http://www.hobbyking.com/hobbyking/s...idProduct=6306
these might fit perfect 21mm high http://www.hobbyking.com/hobbyking/s...dProduct=21346
i'd bury the battery and run one of these http://www.hobbyking.com/hobbyking/s...dProduct=21344

Originally Posted by gazza2003au

these are 24mm high http://www.hobbyking.com/hobbyking/s...idProduct=6306
these might fit perfect 21mm high http://www.hobbyking.com/hobbyking/s...dProduct=21346
i'd bury the battery and run one of these http://www.hobbyking.com/hobbyking/s...dProduct=21344

I already have compact 1300,1800 and 2200 in 3s and frankly I will not buy them again, extremely unimpressed. Nano's seem better.

Originally Posted by aeromaniac

I already have compact 1300,1800 and 2200 in 3s and frankly I will not buy them again, extremely unimpressed. Nano's seem better.

bugger i have 6 or 8 packs of the 4S 1500mah's so far they've been good theres a thread here on them http://www.rcgroups.com/forums/showthread.php?t=1607931