On the subject of propulsion for these micro airliners......

V911 tail blade
http://www.banggood.com/Wholesale-2-...t-p-38575.html



V911 Tail motor
http://www.banggood.com/Wholesale-Wl...t-p-38689.html


Would these be any good?

Originally Posted by djdavies83

On the subject of propulsion for these micro airliners......

V911 tail blade
http://www.banggood.com/Wholesale-2-...t-p-38575.html



V911 Tail motor
http://www.banggood.com/Wholesale-Wl...t-p-38689.html


Would these be any good?

Ahhhhhhh. Out of stock on the motors! Thanks for the link, When they get stock I will try a few of these.

see that's what I am talking about. Using the cheap V911 parts. If we can combine these with the 911 brick, then we're in business, Is the tail motor strong enough? Is the tail of the CP helis stronger? There is also nine eagles CP tail rotors and other brands if the MCPX ones seems expensive.

Oh how big are these anyways?

Originally Posted by RCAddict16

Oh how big are these anyways?

Based on the site, 19" length and 20" WS. (DF-380 at least...)

Dynamicfoamy, if i order this kit, will i need to cut any parts out, or do they come precut?

Ohhh. I like that what about a speedy 2S setup, 3000 kv with a 3x3

Originally Posted by RCAddict16

Ohhh. I like that what about a speedy 2S setup, 3000 kv with a 3x3

Then it would be a real jet!!!

I actually have a UM stryker motor/prop combo, 5 amp ESC, and a 2S 250 pack just sitting around....... and four HTX500s............. might have to get one of these. Idk, would the wings rip off at 50 mph?

moderator please delete this post

It's more for people who already have a brick laying around instead of in a plane.

Originally Posted by RCAddict16

I actually have a UM stryker motor/prop combo, 5 amp ESC, and a 2S 250 pack just sitting around....... and four HTX500s............. might have to get one of these. Idk, would the wings rip off at 50 mph?

Toooo heavy of equipment. And yes the wings would come off.

Lol. I also have all the gear from a UMX Extra 300, would these work with a tractor setup? I don't really mind how it looks.

Originally Posted by RCAddict16

Lol. I also have all the gear from a UMX Extra 300, would these work with a tractor setup? I don't really mind how it looks.

I don’t see why not? It all comes down to balance, you would have to shift the Rx board aft of the CG. My last concern would be torque from a larger diameter prop, but the wing area should allow it. Just my thoughts……

well if a 16" extra 300 didn't roll, I don't think at 20" will. Its a 130x70 mm prop, I have 3 of them. Plus four 160 thunderpowers......... ok sorry to be off topic but I just saw the hellcat. How does it fly?

I'd still like to know if the kit comes precut...