Previous deal fell through so once again offering for sale my ECOMRC Wilga.
WingSpan - 88.5"
Length - 62.3"
Wing Loading 33oz/sq ft.
Weight - 15.2 lbs.
DLE 30 w/ good CMK plug, not the include, stock muffler (less than 1 gallon of gas through it, runs great!)
SmartFly Ignition Regulator
Xoar Axil 18x8 Prop
Xoar Standard Wooden 18x10 for after break-in
Hub from Valleyview RC
6 HiTec 645MG servos, 1 standard throttle servo
SWB Arms on all servos except rudder and throttle
Servo City booster servo extension cables on the ailerons
Fromeco Sahara Regulator
JR Deluxe Switches (ALL electrical connections EXCEPT engine ignition are fitted with Anderson Power Poles)
Sullivan Crap-Traps and Dubro in-line fuel filters and T
Fuel Vent filter from Don's Hobby Shop
Secraft Fuel Dot
Dubro 4.5" Inflatible tires
PSP Titanium Axles
Central Hobbies Carbon Tube w/ Titanium connectors on elevator
Recently completed, it has 6 flights, never crashed or banged up. Always stored in temperature controlled environment. Has working flaps. All gear except receiver was NIB. Various mods performed include carbon supports at the cabin wing root, stablizer fixed solid to tail, gear strut machined for 3/16" axles, new springs added to gear shocks, gear attachment box glassed, all hinge areas gap sealed, Robart hinges and various other tweaks. Add your own receiver battery and ignition battery, go fly. Will knock 100.00 off if you want to use your own receiver. If you bring a jug will also give you a gallon and 1/2 of remaining break-in gas. The plane flies well, have experienced no bad habits, 1/2 flaps and a bit of power make for smooth landings. Weather and obligations the past couple years have sharply decreased the time I have to fly, it'll look better at your flying field than just sitting in my hanger. Am asking $1100.00.
PM me with questions and will do my best to answer. More pics, including build pics available on request. Thanks for looking!
THIS IS LOCAL PICKUP ONLY, I WILL NOT RESPOND TO SHIPPING QUERIES. WILL TRAVEL UP TO 75 MILES FROM FAYETTEVILLE, ARKANSAS TO MEET BUYER.
Just a little more than I care to bite off I guess. We will be in Memphis weekend after next, and I was just trying to figure driving time/gas costs involved. Thanks again. Nice ship, looks built right. Brian
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||New ECOMRC Pilatus PC-21 from TBM||scatsob||Scale ARF/RTF||464||Aug 18, 2015 09:26 PM|
|Discussion||Everything wilga (Sapac Wilga 2000 Mods, Vids etc...)||KentuckyRanger||Foamies (Kits)||60||Jul 06, 2015 06:25 PM|
|Wanted||Wilga 35||dong727||Aircraft - Fuel - Airplanes (FS/W)||1||Jul 08, 2012 02:02 PM|
|Discussion||ecomrc from troybuilt for tug duty?||balsabozo||Scale Sailplanes||1||Feb 06, 2012 05:20 PM|
|Discussion||Wilgas Wilgas!||Ranfred Radius||Scale Sailplanes||10||Aug 08, 2008 04:48 PM|