3d, its a sweet flying jet! I just bought a pair of 50c 2200 3 cells for my new one today

yes flies great stock and many high power mods for the speed freaks!

Got my E-Flite BL15 3600 yesterday still need to cut down rotors (Going with Eflite so i do not have to mess with collets. i have 3 choices for housing ...Stock Hoffman magnetics packedge that comes with the mighty might or Dons wicked 4400KV Packedge...any one of these using the E-flite rotoe and there housing..suggestions??

Mal

Kushal, Don's is the xfan im using, the set up is now in my F20 and it's a good 150 mph, I'm going to use a 70mm in my new Phazer but still thinking what fan/motor combo i wanna use, have several options in my collection

I forgot to mention the 'stock' fan but that will not accept the BL Motor so Dons it is. I have found someone here in Town that will do the machine work (Local High school) I have Three Rotors if i can come out with 2 i will be happy..Hopefully i can get two cut down and have the other came home . I love how long they have made the leads on this motor last time i bought one they were half the length.

Wish me luck

Mal

You can fit the bl15 in the hyperflow here is a link to the post how i did mine.

http://www.rcgroups.com/forums/showp...&postcount=400

I doubt the hyperflow shroud would hold up to the 1200+ watts im inputing in my 60mm setup, if it does id like to see it

So far it takes 900+ no problems, It will be just fine at 1200+.

Imo, thanks for the info, i may cut down a eflite rotor and run a bl15 3600kv and mount it in my hyperflow now, then we will see it at 1200 watts. My new 50c batts really woke up my foam gp F-20

OK Have another Snag I just got don`s fan 4400 and 60 AMP HOBBYWING SBEC ESC I have Spektrum I have tried all DSM2 i have from 6 to 9 CH I can get C . But anything else it gives the first tones and then sits there and beeps...Don has on his site that you should use these ESC`s On the other hand Castle Creations runs it...but i would feel better using what Don recomends.....It`s Almost like the ESC he Sent needs a UBEC....i am at the point i want to scream

Regards
Mal

BTW THANKS FOR POSTING THE LINK AGIAN

I am double posting here but i think i will get better response here. I bought a Fan motor ESC Combo from Don. I got the Hobbywing flyfun 60A 2-6S SBEC 5V@3A ESC I hooked everything up throttle at Zero 2 clicks of down on throttle... i get the first tones ....then BEEP BEEP BEEP Like it was a OPTO.????? HELP!!
Regards
Mal

Make sure your throttle trim is all the way down and that you have full travel (+-125) on your throttle channel. Some ESC's won't initialize unless it sees full throttle stop from the transmitter.

I'm going to post the doppler type vid of my F-20 to show you all what the Phazer looked like full tilt with 50c batts, my buddy trashed his from pilot error yesterday so it looks like I'll have the only one at the field until he builds his second.

I re-maidened my Phazer after installing one of Don's Wicked dynamically balanced 60mm fan and motor combos and I was completely blown away. It sounded amazing. It was incredibly quiet compared to the stock Hyperflow fans but was still streaking through the air at about 120mph if I had to guess. It might have been faster but it didn't seem like it was going that fast because it was so quite. I used one of Don's 60mm 5-bladed fans and the Wicked 4400 Plus motor. Amazing. I'll try to get some video when I fly her next.

Originally Posted by Double E

I re-maidened my Phazer after installing one of Don's Wicked dynamically balanced 60mm fan and motor combos and I was completely blown away. It sounded amazing. It was incredibly quiet compared to the stock Hyperflow fans but was still streaking through the air at about 120mph if I had to guess. It might have been faster but it didn't seem like it was going that fast because it was so quite. I used one of Don's 60mm 5-bladed fans and the Wicked 4400 Plus motor. Amazing. I'll try to get some video when I fly her next.

How Many Watts are you getting I have the same setup...using the Nano 2200 35-70C 4S Packs Pulling just under 50AMPS and 737 WATTS and it was Taxing that motor...I Smoked the Hoffman Mighty Might Measuring watts and AMPS close to those above ...I am thinking no more than 3 cells for the outrunner and my E-Flight BL3600 with cut down rotor for 4S......unless i am doing something wrong i do not know about.

Regards
Mal