SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Reply
Thread Tools
Old Jul 24, 2012, 12:20 AM
Registered User
Joined May 2012
124 Posts
New Product
Zero UAV YS-X6 [Owners Thread] *Autopilot system for multirotors*

Hello to All,
Zero UAV YS-X6 is a complete flight system for multirotors, which supports Android/Apple IOS and PC system.
Surprises:
All Versions come with free GCS of Android/Apple and PC.
& Activity "FREE Fly": http://www.rcgroups.com/forums/showthread.php?t=1703032
Everyone can fly Multirotors now by using your existing iphone or andriod phone and PC...
Anyone can upgrade it whenever need a more challenging flight or share a professional aerial photography/filming...
You know about it.... Come Come Come to join us and enjoy your fly!!

Welcome to contact with us for more details or on any questions:
Sales: sales@zerouav.com
Technical Support: support@zerouav.com
Other information: distributor@zerouav.com
Website: www.zerouav.com


Functions Brief Description:
1 Auto (Takeoff/ Go Home/Landing)
2 Handfeel Control (Phone Attitude Control *NEW function*)
3 Target Lock & Fly encircle
4 Click/Touch & Fly To Point
5 Realtime Flight status (Google Earth Map)
6 Follow Me (Auto-tracking)
7 Auto-Navigation (Waypoints)
8 Flyfree (Joystick Control)
9 Fail/Safe (auto hover--go home--landing)
10 Realtime Power Display Information
11 Low Voltage Alert (By Phone Vibration)
12 RTH Switch from Transmitter directly
13 Built-in Gimbal Stabilization
14 Flight Control Mode(GPS Atittude Mode/ Atittude Mode/ Manual Mode)
15 Support Quad/Hexa/Octo (type I/type V/type Y & A customize motor mixer)
16 Support receiver {S-BUS/Normal Mode/Self-adaptive(PPM *COMING soon*)}
17 Built-in Damper in IMU
18 Accurate Position & Altitude Hold(Hover Precision is within±1.5m horizital and ±0.5m Vertical)
19 Support Steadycam structure, need to add the second customized IMU (*NEW function*, need to customize)
20 Support Bluetooth module(*NEW function*)
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Last edited by Zero UAV; Nov 04, 2013 at 08:41 PM. Reason: manual upgrading
Reply With Quote
Sign up now
to remove ads between posts
Old Jul 24, 2012, 12:21 AM
Registered User
Joined May 2012
124 Posts
YS-X6 Promo Video
YS-X6(The Promo Video) (1 min 51 sec)


YS-X6 Pulling Force Test Video-August 25th
http://v.youku.com/v_show/id_XNDQzMTEyODQ0.html


YS-X6 Functions Video
YS-X6 FEATURE (4 min 13 sec)


YS-X6 with ZERO820 Hexa Video
YS-X6 Hexa DEMO.mp4 (3 min 0 sec)


YS-X6 with *Steadycam* Video
YS-X6 "LS" Gimbal Test (2 min 4 sec)
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Last edited by Zero UAV; Nov 06, 2012 at 03:50 AM.
Reply With Quote
Old Jul 24, 2012, 12:22 AM
Registered User
Joined May 2012
124 Posts
YS-X6 Installation Video (Words & Music)
YS-X6 Installation Video.wmv (11 min 19 sec)


YS-X6 Installation introduction Video (Step by Step)
Step1
ZeroUAV YS X6 Setup Part 1 (3 min 41 sec)

Step 2
ZeroUAV YS X6 Setup Part 2 (5 min 19 sec)

Step 3
ZeroUAV YS X6 Setup Part 3 (7 min 41 sec)

Step 4
ZeroUAV YS X6 Setup Part 4 (9 min 14 sec)



The configuration of WIFI communication modes has been updated, which is more simple for users, so if necessary you can change the WIFI module between router mode and point-to-point mode.
Router Mode: router is used as the transfer station between Phone and WIFI
Point-to-Point Mode: WIFI module directly communicates with Phone, so other transfer device such as router is no need.
Please configurate your wifi according to the video shown as below:
WIFI ConfigurationNew (3 min 3 sec)


Firmware Upgrade
Zero UAV Serial Port Configuration and Firmware Upgrade (2 min 1 sec)
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Last edited by Zero UAV; Dec 18, 2012 at 10:00 PM.
Reply With Quote
Old Jul 24, 2012, 12:30 AM
Registered User
Joined May 2012
124 Posts
ZERO-Steadi470 is an excellent Aerial Photography System which creats the greatest possibility to make the most stable aerial photography videos.It will be released in two or three weeks. Look forward your attention.

ZERO-Steadi470 Aerial Photography System Video
ZERO-Steadi470 Aerial Photography System.mpg (2 min 49 sec)
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Last edited by Zero UAV; Aug 22, 2012 at 01:49 AM.
Reply With Quote
Old Jul 24, 2012, 12:30 AM
Registered User
Joined May 2012
124 Posts
More videos to be attached....
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 01:10 AM
Registered User
Joined Feb 2009
565 Posts
What does the new firmware of 23-7-2012 bring? What has changed?
rwijnhov is offline Find More Posts by rwijnhov
Reply With Quote
Old Jul 24, 2012, 01:12 AM
ZeroUAV
ise2012's Avatar
Australia, SA, Tarcoola
Joined Jul 2012
84 Posts
the YS-X6 lasted manual

the usb driver ,,,,,pls download it ,
ise2012 is offline Find More Posts by ise2012
Site Sponsor
Last edited by ise2012; Feb 20, 2013 at 11:36 PM.
Reply With Quote
Old Jul 24, 2012, 01:57 AM
Registered User
Joined Mar 2010
1,206 Posts
Quote:
Originally Posted by ise2012 View Post
safa, a new war is comming ...
FlyingMcCoy is offline Find More Posts by FlyingMcCoy
RCG Plus Member
Latest blog entry: Indoor 3d
Reply With Quote
Old Jul 24, 2012, 02:05 AM
Registered User
Joined Feb 2010
203 Posts
I'd also like to know whatthe new firmware of 23-7-2012 brings? What has changed?
jdreitman is offline Find More Posts by jdreitman
Reply With Quote
Old Jul 24, 2012, 02:17 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by rwijnhov View Post
What does the new firmware of 23-7-2012 bring? What has changed?
Bring three new functions:

2 Handfeel Control (Phone Attitude Control *NEW function*)

19 Support Steadycam structure, need to add the second customized IMU (*NEW function*, need to customize)

20 Support Bluetooth module(*NEW function*)

Changed=Added:

Add "Default" button in GCS, *one key of resetting back to factory default parameters"**.
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 02:22 AM
Registered User
Joined Feb 2010
203 Posts
That's great news. What exactly is the steady cam feature? Also, I noticed the iOS software had an update as well? What's changed?

Thanks for your hard work. You've already proved to have a much better product and support against your competitors. I'm glad I switched from DJI to you guys.
jdreitman is offline Find More Posts by jdreitman
Reply With Quote
Old Jul 24, 2012, 02:49 AM
Registered User
Finland, Uusimaa, HKI
Joined Jan 2012
291 Posts
Nice, would be good if you also keep latest manual available here. Where can i order second IMU for steady cam feature?
KariY is offline Find More Posts by KariY
Reply With Quote
Old Jul 24, 2012, 03:22 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by jdreitman View Post
That's great news. What exactly is the steady cam feature? Also, I noticed the iOS software had an update as well? What's changed?

Thanks for your hard work. You've already proved to have a much better product and support against your competitors. I'm glad I switched from DJI to you guys.

It begins to work on the Steadycam multirotor, to make the flight more stable and get a much better photography or filming effect. Exact features come later, welcome your following

IOS/Android/PC are updated with same features added.

Thanks very much for your supporting too, jdreitman!
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 03:32 AM
Registered User
Finland, Uusimaa, HKI
Joined Jan 2012
291 Posts
Quote:
Originally Posted by Zero UAV View Post
It begins to work on the Steadycam multirotor, to make the flight more stable and get a much better photography or filming effect. Exact features come later, welcome your following
Does Steadycam affect to flight rather than just gimbal stabilizing? Can't wait to hear more. Sounds very nice new features, big thanks for hard work again! You are doing awesome work guys.

Kari
KariY is offline Find More Posts by KariY
Reply With Quote
Old Jul 24, 2012, 04:53 AM
Registered User
Joined Feb 2009
565 Posts
What is this:
2 Handfeel Control (Phone Attitude Control *NEW function*)

?
rwijnhov is offline Find More Posts by rwijnhov
Reply With Quote
Old Jul 24, 2012, 04:59 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by rwijnhov View Post
What is this:
2 Handfeel Control (Phone Attitude Control *NEW function*)

?
Sway your phone to control the multirotor


Please check the function video above too
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 05:00 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by KariY View Post
Does Steadycam affect to flight rather than just gimbal stabilizing? Can't wait to hear more. Sounds very nice new features, big thanks for hard work again! You are doing awesome work guys.

Kari
Hi Kari, thanks for following...
Steadycam is a especially stable structure, like its advertisement: "It's not just about stabilization, It's about initial camera stability".
And now YS-X6 can support this kind of structure, if match them together, it may achieve a higher stabilization level like:**a tiger with wing**

Thanks for the complements, hope we can perfect it and do better....
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 05:03 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by KariY View Post
Nice, would be good if you also keep latest manual available here. Where can i order second IMU for steady cam feature?
Can order from local distributor
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 05:13 AM
Registered User
Frank.T's Avatar
Nederland, NH, Amsterdam
Joined Jul 2010
992 Posts
Any look out for Care Free (MK name), Couse/home-lock (DJI name) ?
I love to have that.


Also a couple of waypoints and full circle in PTZLock for free ;-)

//Frank
Frank.T is offline Find More Posts by Frank.T
Reply With Quote
Old Jul 24, 2012, 05:18 AM
Suspended Account
Joined Nov 2011
597 Posts
Will we be able to use a 2nd imu for other gimbals?
nicwilke is offline Find More Posts by nicwilke
Reply With Quote  (Disabled)
Old Jul 24, 2012, 05:49 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by Frank.T View Post
Any look out for Care Free (MK name), Couse/home-lock (DJI name) ?
I love to have that.


Also a couple of waypoints and full circle in PTZLock for free ;-)

//Frank
Hi Frank, welcome your question. I don't promise the exact date, but I'm sure it will have similar or better feature like Care Free or home lock...

PTZ lock... need more time...
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 05:52 AM
Registered User
Frank.T's Avatar
Nederland, NH, Amsterdam
Joined Jul 2010
992 Posts
Quote:
Originally Posted by Zero UAV View Post
Hi Frank, welcome your question. I don't promise the exact date, but I'm sure it will have similar or better feature like Care Free or home lock...

PTZ lock... need more time...
You make me happy
Frank.T is offline Find More Posts by Frank.T
Reply With Quote
Old Jul 24, 2012, 06:11 AM
Registered User
Joined Feb 2010
203 Posts
When you talk about the "Steadycam Multirotor", are you talking about this one: http://www.rcgroups.com/forums/showthread.php?t=1656651 ?

Quote:
Originally Posted by Zero UAV View Post
It begins to work on the Steadycam multirotor, to make the flight more stable and get a much better photography or filming effect. Exact features come later, welcome your following

IOS/Android/PC are updated with same features added.

Thanks very much for your supporting too, jdreitman!
jdreitman is offline Find More Posts by jdreitman
Reply With Quote
Old Jul 24, 2012, 06:38 AM
Registered User
Joined Dec 2010
501 Posts
Very nice idea of creating a thread ZeroUav.

Looking forward to see what you have planned for the Steadycam multirotor.

Do you also have plans to release a cheaper FC to capture sales in the lower end? ex.Naza
redridinghood is offline Find More Posts by redridinghood
Reply With Quote
Old Jul 24, 2012, 06:47 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by redridinghood View Post
Very nice idea of creating a thread ZeroUav.

Looking forward to see what you have planned for the Steadycam multirotor.

Do you also have plans to release a cheaper FC to capture sales in the lower end? ex.Naza
Thanks for subscribed, redridinghood! Welcome...

The hobby level is in progress, we named it YS-X4, need to wait for the official release...
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 06:54 AM
Registered User
Joined Feb 2010
203 Posts
ZeroUav, Not sure if you've seen my video, but I think you might enjoy it. We turned the follow-me feature on and strapped the iphone to another copter. We then had the Zero Uav follow around that copter. It was pretty cool.

You'll notice however that it's not very steady. Each time the copter needed to get new coordinates, it had a very jerky motion. Any suggestions to make the auto-follow more steady?

YS-X6 Auto-following another hexacopter carrying iPhone. Amazing! (6 min 13 sec)
jdreitman is offline Find More Posts by jdreitman
Reply With Quote
Old Jul 24, 2012, 08:32 AM
ZeroUAV
ise2012's Avatar
Australia, SA, Tarcoola
Joined Jul 2012
84 Posts
See downstairs
ise2012 is offline Find More Posts by ise2012
Site Sponsor
Last edited by ise2012; Jul 24, 2012 at 08:42 AM.
Reply With Quote
Old Jul 24, 2012, 08:41 AM
ZeroUAV
ise2012's Avatar
Australia, SA, Tarcoola
Joined Jul 2012
84 Posts
just my person suggestions

Quote:
Originally Posted by jdreitman View Post
ZeroUav, Not sure if you've seen my video, but I think you might enjoy it. We turned the follow-me feature on and strapped the iphone to another copter. We then had the Zero Uav follow around that copter. It was pretty cool.

You'll notice however that it's not very steady. Each time the copter needed to get new coordinates, it had a very jerky motion. Any suggestions to make the auto-follow more steady?

http://www.youtube.com/watch?v=mNPDD8Q1fHc
hi ,my friend. i am very like the video that you provided.it was very cool ,
a little small regret is not very stable when the copter get new coordinates.

The follow is Only my personal suggestions.

1.the deviation of installion direction or virbration or shaking will affect the IMU/
during flight,you need observe the "vilbrate"and "shake"in "data"to judge
,it is normal range from 0-9.

2.the attitude adjustment of muliti-axies are based on motor speed adjustment
so the ruder sensitivity will affect the attitude adjustmen accuracy .you
need to adjust the weight \pitch propeller matching once more,
to make the motor keep enough speed and generat enough rudder effect.

3.you can adjust "toll and pitch sensitivity"in GCS, and "shaking compensation "
to do some certain adjustment.

4.try to do the better damping of PTZ.

5.you can change the PTZ Roll and Pitch Sensitivity in GCS.
these two parameters used to adjust the correction angle of gymbal .
if you feel correction angle is small ,can fill in bigger number.
on the contrary fill in smallnumber.

6.The quality of the phone's positioning capabilities maybe can affect the coordinates.

7.maybe use another IMU to make it more steady .

ise2012
ise2012 is offline Find More Posts by ise2012
Site Sponsor
Reply With Quote
Old Jul 24, 2012, 12:26 PM
MULTIROTOR FREAK
India, KA, Bangalore
Joined Aug 2011
196 Posts
to ZERO UAV TEAM, Please urgently test your Autopilot with Turnigy DLUX ESC
link: http://www.hobbyking.com/hobbyking/s...ng_2s_4s_.html

There is a lot of twitching and motors stalling problem with thoose ESCs Please check
AND TO all ZERO UAV USERS

do NOT use Turnigy DLUX ESCs on ZERO UAV please .....
they have a good cell range from 2~6 but will not WORK with ZERO UAV do not risk your multicopter

IF any one need video proofs please let me...

Can ZERO UAV team can u analyze the problem by using ur HJ file from my Iphone
ask if need I will upload or mail it to u
hemanthtguru is online now Find More Posts by hemanthtguru
Reply With Quote
Old Jul 25, 2012, 12:27 AM
Registered User
Frank.T's Avatar
Nederland, NH, Amsterdam
Joined Jul 2010
992 Posts
I doubt that it is a YS-X6 problem, those ESC are know to be crappy.

(Why other ones are working)
Frank.T is offline Find More Posts by Frank.T
Reply With Quote
Old Jul 25, 2012, 01:26 AM
Registered User
Joined May 2012
124 Posts
[Can ZERO UAV team can u analyze the problem by using ur HJ file from my Iphone
ask if need I will upload or mail it to u[/QUOTE]

Hi hemanthtguru, thanks for your precious feedback, please kindly send your hj file to support_zerouav@yeah.net for our analyze. Its Serial No. together please. Thanks!
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 25, 2012, 04:54 AM
glassfox's Avatar
Tianjin, China
Joined Jan 2008
2,688 Posts
I am happy with YS-X6 so far, it has many new features and it's for advanced user for sure,
may I attach a test video here ?
ZeroUAV YS-X6 multirotor controller (2 min 4 sec)
glassfox is offline Find More Posts by glassfox
Site Sponsor
Old Jul 25, 2012, 05:27 AM
jab
Unregistered User
Joined Aug 2007
1,082 Posts
Very happy with mine also. The YS-X6 is very stable on a big octocopter with large 15" propellers.

BlackStar8 - YS-X6 - Strong wind (2 min 3 sec)
jab is offline Find More Posts by jab
Reply With Quote
Old Jul 25, 2012, 05:29 AM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by glassfox View Post
I am happy with YS-X6 so far, it has many new features and it's for advanced user for sure,
may I attach a test video here ?
http://www.youtube.com/watch?v=QBqZshu3YWc
Nice one, look forward to more videos!!
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 25, 2012, 07:18 AM
Suspended Account
Joined Nov 2011
597 Posts
YS-X6 multi-rotor auto pilot waypoint navigation & auto landing (2 min 31 sec)
nicwilke is offline Find More Posts by nicwilke
Reply With Quote  (Disabled)
Old Jul 25, 2012, 07:55 AM
... and other flying animals
Joined Apr 2012
217 Posts
impressive. what configurations can I fly? Y6? hex V?
What is the cost for more waypoints (around 20 or 30) ?
How works "follow me"? with transmitter or with touch on map?
Flying Rabbit is offline Find More Posts by Flying Rabbit
Reply With Quote
Old Jul 25, 2012, 08:25 PM
Psionic001's Avatar
Australia, NSW, Sydney
Joined Apr 2006
2,189 Posts
@nicwilke
I think I can see and hear some excessive vibrations that look like the gains are too high. Is that the case? Or is it just me/youtube? Looks like 5-10hz vibrations.
Psionic001 is online now Find More Posts by Psionic001
RCG Plus Member
Reply With Quote
Old Jul 25, 2012, 08:56 PM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by jdreitman View Post
ZeroUav, Not sure if you've seen my video, but I think you might enjoy it. We turned the follow-me feature on and strapped the iphone to another copter. We then had the Zero Uav follow around that copter. It was pretty cool.

You'll notice however that it's not very steady. Each time the copter needed to get new coordinates, it had a very jerky motion. Any suggestions to make the auto-follow more steady?

http://www.youtube.com/watch?v=mNPDD8Q1fHc
Quote:
Originally Posted by glassfox View Post
I am happy with YS-X6 so far, it has many new features and it's for advanced user for sure,
may I attach a test video here ?
http://www.youtube.com/watch?v=QBqZshu3YWc
Quote:
Originally Posted by jab View Post
Very happy with mine also. The YS-X6 is very stable on a big octocopter with large 15" propellers.

http://www.youtube.com/watch?v=NOpzFpSQk6Q
Cool videos..... they absolutely deserve some more* FREE features upgrade* duiring the August Activity, please noted to track the coming activity.Will post it soon.
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 25, 2012, 09:06 PM
Registered User
Joined May 2012
124 Posts
Quote:
Originally Posted by Flying Rabbit View Post
impressive. what configurations can I fly? Y6? hex V?
What is the cost for more waypoints (around 20 or 30) ?
How works "follow me"? with transmitter or with touch on map?
You can fly any * +/X/Y types* of Quad/Hexa/Octo !
"Follow me" is working with your phone which should have built-in GPS funciton.
Zero UAV is offline Find More Posts by Zero UAV
Site Sponsor
Reply With Quote
Old Jul 25, 2012, 10:23 PM
Registered User
Joined Feb 2010
203 Posts
That's great news! We're looking forward to seeing what's coming

Quote:
Originally Posted by Zero UAV View Post
Cool videos..... they absolutely deserve some more* FREE features upgrade* duiring the August Activity, please noted to track the coming activity.Will post it soon.
jdreitman is offline Find More Posts by jdreitman
Reply With Quote
Old Jul 26, 2012, 06:12 AM
Suspended Account
Joined Nov 2011
597 Posts
Quote:
Originally Posted by Psionic001 View Post
@nicwilke
I think I can see and hear some excessive vibrations that look like the gains are too high. Is that the case? Or is it just me/youtube? Looks like 5-10hz vibrations.
I've got the X8 setup as stock. Using Turnigy Plush 30A non flashed ESC's set to medium I believe (need to check with prog card).

I'm going to recalibrate the ESC's when I have time, then test again before changing anything else.
nicwilke is offline Find More Posts by nicwilke
Reply With Quote  (Disabled)
Old Jul 26, 2012, 08:12 AM
Registered User
United States, MN, St Cloud
Joined Jan 2012
534 Posts
To the Zero UAV Team Would it be possible to add obsticale avoidance with ultrasonic or IR to avoid hitting Poles or wires when flying waypoints?
richkphoto is offline Find More Posts by richkphoto
Reply With Quote
Old Jul 27, 2012, 03:12 AM
RTF copters maker
maximus-rc's Avatar
South France
Joined Jan 2008
1,186 Posts
subscribed

Maximus
maximus-rc is offline Find More Posts by maximus-rc
Reply With Quote
Old Jul 29, 2012, 12:34 AM
EASILY ANNOYED
United States, MI, New Buffalo
Joined Aug 2011
152 Posts
Can someone upload a screen capture vid on the proper way to upgrade firmware? I have the com port configured property in Device Manager and double checked in the firmware upgrade program. I always receive an Authorized Failure! error message. Anyone?
zuby1 is offline Find More Posts by zuby1
Reply With Quote
Old Jul 29, 2012, 09:13 PM
Registered User
Joined May 2012
15 Posts
Quote:
Originally Posted by zuby1 View Post
Can someone upload a screen capture vid on the proper way to upgrade firmware? I have the com port configured property in Device Manager and double checked in the firmware upgrade program. I always receive an Authorized Failure! error message. Anyone?
When receiving "Authorised Failure" message ,it means that your software upgrade encryption does not have the same FC serial encoding ,ask you Dealer to contact Zero to resove for you.
multirotortech is offline Find More Posts by multirotortech
Reply With Quote
Old Jul 29, 2012, 09:46 PM
ZeroUAV
ise2012's Avatar
Australia, SA, Tarcoola
Joined Jul 2012
84 Posts
Quote:
Originally Posted by richkphoto View Post
To the Zero UAV Team Would it be possible to add obsticale avoidance with ultrasonic or IR to avoid hitting Poles or wires when flying waypoints?
Thank you for supporting our products,the obsticale avoidance function you suggested is great,wen may be add it in one day . but it need time to come true and test it . maybe we can not add it . thank you again .
ise2012 is offline Find More Posts by ise2012
Site Sponsor
Reply With Quote
Old Jul 29, 2012, 09:48 PM
ZeroUAV
ise2012's Avatar
Australia, SA, Tarcoola
Joined Jul 2012
84 Posts
Quote:
Originally Posted by zuby1 View Post
Can someone upload a screen capture vid on the proper way to upgrade firmware? I have the com port configured property in Device Manager and double checked in the firmware upgrade program. I always receive an Authorized Failure! error message. Anyone?
Please download the newest "YS-X6 Upgrade tool" in the Attached Files on the first page of this thread
it wiil be slove the problem .
ise2012 is offline Find More Posts by ise2012
Site Sponsor
Reply With Quote
Old Jul 30, 2012, 01:02 AM
Suspended Account
Joined Nov 2011
597 Posts
Can we tidy the text size up please?

Could we get the next firmware to reduce the size of the text in the Android App of GCS please?

Name: shot.jpg
Views: 190
Size: 81.1 KB
Description:
My settings are already set to tiny, and I'd like to not have broken text lines. I know its a silly request, but it'll help reduce confusion.
nicwilke is offline Find More Posts by nicwilke
Reply With Quote  (Disabled)
Old Jul 30, 2012, 10:42 PM
MULTIROTOR FREAK
India, KA, Bangalore
Joined Aug 2011
196 Posts
hows any one try YS-X6 with simonK firmware....please reply

Can the YS-X6 research See weather the simonk ESC work with YS-X6 if yes whats the refresh to be choose in the GCS settings..
hemanthtguru is online now Find More Posts by hemanthtguru
Reply With Quote
Old Jul 31, 2012, 03:16 AM
Registered User
Finland, Uusimaa, HKI
Joined Jan 2012
291 Posts
Quote:
Originally Posted by hemanthtguru View Post
hows any one try YS-X6 with simonK firmware....please reply

Can the YS-X6 research See weather the simonk ESC work with YS-X6 if yes whats the refresh to be choose in the GCS settings..
Sure, works great. I use normal esc setting.
KariY is offline Find More Posts by KariY
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product DJI WooKong-M Autopilot System for multirotors **Owners Thread** DJI INNOVATIONS Multirotor Electronics 20007 Oct 22, 2014 10:17 AM
Discussion Zero UAV YS-X6 Owners Thread and Discussion fajar Multirotor Electronics 2406 Sep 01, 2014 08:51 PM
New Product Test video of YS-X6 Autopilot system pzhang Multirotor Talk 141 Jun 07, 2012 06:50 AM
Discussion Groupbuy for YS-X6 system fajar Australia 14 May 15, 2012 04:35 AM