any issues with just a standard spektrum sat?

Originally Posted by blade strike

any issues with just a standard spektrum sat?

Not that I am aware of.

Originally Posted by blade strike

any issues with just a standard spektrum sat?

No, not a single one. The AQ was born with a Spektrum connection.

I bond a satellite via the AR9020 on DSMX (via my DX18)

Than I connected the satellite only to the AQ6 and needed to put it on 11bit otherwise it is not working!.

Conclusion, DSMX is working here.

//Frank

Originally Posted by Flyrobot

Hi GoFaster,

Many thanks, this is what im looking for.

John

NOTE:
Picture corrected

Drowned my Dex Autoquad on thursday - got it back on friday. Thanks to Dennis Frie for jumping in after it...

This is the first (and hopefully last) time I have filmed fish with a Quad

Dex AutoQuad "drowning accident" (12 min 15 sec)

First LOL (sorry) luckily you could disconnect the LiPo quickly

Serious, why did it went down? empty LiPo?
(sorry for your crash, but great fish video)

//Frank

Oh Jussi! Sorry for your crash But great video The fish coming to check it out is priceless... LOL And then I thought you'd hook the quad with whatever that pole was, for sure. So close! 20 hours in the water... ouch.

Maybe time for Menno's signalling add-on and a nice loud buzzer! Hope she recovers OK.

-Max

Originally Posted by joebarteam

In its current hardware form? Never, why give up 6-8 ports for standard receivers. If you want to use 'normal' receivers you can use a pwm-ppm converter board.

Where can I buy one of these pwm-ppm converter boards,are they expensive,many thanks,Marty.

Here's one...

http://store.diydrones.com/product_p/br-ppme.htm

Same one from a UK shop: http://www.buildyourowndrone.co.uk/8...p/ppm-e8ch.htm

-Max

Originally Posted by JussiH

Drowned my Dex Autoquad on thursday - got it back on friday. Thanks to Dennis Frie for jumping in after it...

This is the first (and hopefully last) time I have filmed fish with a Quad

Oh boy, hope you'll be getting her back in the air. The AQ board still looks good - the ESCs don't.

Greetings to Dennis, must have been your hero of the day!

Sorry for you. That's first time i see a fish with an multicopter

DUDE!!

That's a Coelacanth!!!

Believed to have gone extinct 65 million years ago.

Again -

KA-PLOOSH!! (far right).

We were so close as we went fishing for it, the line is only an inch or so from grabbing it - Priceless!

Trivia - This image was shot from a quad in flight.

Yep, Dennis Frie was the hero of the day. And now our latest Beta crew member...

I am not gonna reemploy the ESCīs, but I am hopeful that the Motors and the FC could have survived...the baro is dead for sure and bearings will need to be replaced...everything has been rinsed in clean water and cleaned with alcohol afterwards.

But I am just glad I got the Frame and Cam back! The Dex frames are hard to come by and the recording is priceless. I would not go as far as to say it was "worth it", but not too bad..and the rest can be replaced.

Speaking of Dex, Denis just showed his new Pro8 frame. What an amazing frame, simply stunning:

http://www.rcgroups.com/forums/showp...&postcount=680