HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jun 24, 2012, 05:21 PM
F550 Hex, Blade mQX
United States, CO, Colorado Springs
Joined Jun 2012
97 Posts
Discussion
Flymentor 3D & Multirotors?

Will the Flymentor 3D from Hobbyking work with a Tri/Quad/Hex?

If so, how would one go about hooking it up to the Rx/Multicopter Board?
Bearsa LLC is offline Find More Posts by Bearsa LLC
Reply With Quote
Sign up now
to remove ads between posts
Old Jun 24, 2012, 06:02 PM
Registered User
Hawaii
Joined Feb 2003
5,952 Posts
Quote:
Originally Posted by Bearsa LLC View Post
Will the Flymentor 3D from Hobbyking work with a Tri/Quad/Hex?

If so, how would one go about hooking it up to the Rx/Multicopter Board?
It will work in conjunction with a KK board but not really good by itself.
SeismicCWave is offline Find More Posts by SeismicCWave
Reply With Quote
Old Oct 01, 2012, 08:35 AM
Registered User
Belgium, Walloon Region, Waterloo
Joined May 2010
178 Posts
flymentor + kk board

Does anybody has a nice (clear and understandable) HOW TO mount/connect every wires from Flymentor 3D and a KKBoard flashed with v2.5. A setup of the radio is also suitable. By the way, how good is the benefits of adding a flymentor. Thank you - Thierry BE
betibeau is offline Find More Posts by betibeau
Reply With Quote
Old Oct 02, 2012, 09:00 AM
Suspended Account
Joined Jun 2012
988 Posts
Quote:
Originally Posted by betibeau View Post
Does anybody has a nice (clear and understandable) HOW TO mount/connect every wires from Flymentor 3D and a KKBoard flashed with v2.5. A setup of the radio is also suitable. By the way, how good is the benefits of adding a flymentor. Thank you - Thierry BE
i do in my head but no point in sharing it here, i was the 1st person to crack building multi rotors with a helicommand 3d and gyros

i also went on to do the same with flymentors and gyros and both hc3d and fm3d with kk boards

conclusion?

helicommand 3d works great!

flymentor 3d will just frustrate you as you constanyly chase settings

i know more about this kind of setup than ANYONE ELSE who is ever going to post here!

Quadcopter N-DROID PHEONIX ELG tests and fine tuning complete perfection achieved N3M1S1S (6 min 53 sec)
neobot is offline Find More Posts by neobot
Reply With Quote  (Disabled)
Old Oct 03, 2012, 02:23 AM
Registered User
Belgium, Walloon Region, Waterloo
Joined May 2010
178 Posts
Hi NeoBot, Nice video.... Could you provide us a shortcut or a document or any support to help us to connect and setup parameters of the Flymentor 3D and eventualy the corresponding radio setup. Thank you in advance for your cooperation - b rgds - Thierry
betibeau is offline Find More Posts by betibeau
Reply With Quote
Old Oct 03, 2012, 02:26 AM
Registered User
Belgium, Walloon Region, Waterloo
Joined May 2010
178 Posts
here is the only (more or less) valuable info I have found so far. It seems to work great with a GAUI 330X. Thierry
Gaui 330X Quad with FLYMENTOR 3D ...Working !! (10 min 57 sec)
betibeau is offline Find More Posts by betibeau
Reply With Quote
Old Apr 16, 2013, 03:56 PM
Registered User
Joined Apr 2010
23 Posts
Hi guys.

I have lost the usb interface.
It is posible to setup the Flymentor from zero
helicam1980 is offline Find More Posts by helicam1980
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Flymentor 3D configuration for Tricopter sleper UAV - Unmanned Aerial Vehicles 3 Apr 16, 2013 03:59 PM
Sold KDS Flymentor 3D juneebear Aircraft - Electric - Helis (FS/W) 1 Apr 11, 2012 09:28 PM
Sold KDS Flymentor 3D juneebear Aircraft - General - Radio Equipment (FS/W) 0 Apr 11, 2012 06:02 PM
Sold KDS Flymentor 3D ROKJR56 Aircraft - Electric - Helis (FS/W) 3 Apr 11, 2012 08:20 AM
Discussion flymentor on multirotor bigbro3760 Multirotor Talk 7 Oct 22, 2011 04:10 PM