ok i just had another plust go out and it has not even see flight, im sick of them,
sooooooo.....................


looking for 5x 30 amp esc thats flashble to simonk, i can flash them myself, i can pay tues eve. hk is fine or what ever, just done with the plush. drop me a pm if you have any. thanks

found one but i would like another if some one is willing to part with one, thanks everyone,

do not want the plush anymore. just had another one quit on me and they have zero time on them, im done wit hplush, sooooo, if you have 5 esc's you would part wit hi will be pp ready tues eve. thanks

You can buy some of these: http://www.hobbyking.com/hobbyking/s...3A%5FUBEC.html

They work great and can be flashed with Simonk or wii-ESC (works better with motors that loose sync with Simonk). Best of all they are less than $9 and they have all the programming pads in a nice little row along one edge.

In stock now last time I checked.

Good luck,
Wingspinner

yea. F-20A & F-30A ARE THE BEST! FLASH WITH BS_NFET.HEX

rctimer escs are very afordable and can be flashed.

im trying to find and flash a set of 25a

RCTimer esc are also not a very good choice since they have no external oscillator and throttle range will drift with temperature.

@timecop,

What inexpensive esc would you reccomend that is not overly complicated to solder to?

The F30 recommended all over the flashing thread.

What's going wrong with the plush's? I have found them to be pretty reliable.

Originally Posted by SleepySean

What's going wrong with the plush's? I have found them to be pretty reliable.

im not sure, sometimes they will start and sometimes they dont, i have first noticed this while hooking straight up to my rx to do the thro calabration, seems like once they are warmed up everything is ok in flight but still makes me nervous. i would rather install them in something other than a frame that cost alot and carring my naza gps fc ya know. maby its the bullet conn, im fixing to take them off right now and solder them direct but in the mean time im going to look for 5-6 other that i can at least flash, these havethe silabs processor in them and are not flashable.

and to you tc,,,,,,stay away from all my threads and post, no one wants to hear you crap !!!!!

Dear crash8384,

Please take a look at the top of this thread:

"This thread is privately moderated by crash8384, who may elect to delete unwanted replies."

You may exercise this capability at any time, deleting unwanted replies.

If you disagree with my recommendation of the F-30A esc (which is also recommended by wingspinner just a few posts above), you're free to delete both his and my posts.

I am not "crap" in your threads, I was simply answering a question and informing the user.

ahhhh thank god for the ignore button lol

its 3am here and i just came in from a great flight with the plushes, still dont like them as they are not as smooth as esc's with simonk firmware. what i did was take off the bullets and solder direct. anywhew she it working good just not great. it could be better but till my order comes in from china with a box full of 25 and 30 ampers per the above post these will have to do, thanks guys that i like on here