To confirm:

1. S800 owners will get ESC's replaced with new ones. Don't bother with the esc mod if you don't want to. Just have the Esc changed out with new one.

2. Check your WKM MC and makes sure your M1 is not outputting low measurement.

3. Double check the prop mounting and make sure they are level.

4. I picked a great time to take a few days off for vacation.

5. Free OSD to all exisitng S800 customers for having to go thru this hassle.

6. its been a pain but rest assured DJI and its dealers/Dist. are working on getting this resolved and sorry for the inconvenience.

7. Existing S800 customers that have crashed contact your dealer for replacement.

Wait a second, the problem with the old MC (which is what i def. have) comes from the very
long wires from the MC to the ESCīs?
What if i want a similar setup in a custom frame?

Originally Posted by Hypam

Wait a second, the problem with the old MC (which is what i def. have) comes from the very
long wires from the MC to the ESCīs?
What if i want a similar setup in a custom frame?

Then, you have to make sure the ESC you are using is made for that first.

So having longer power leads on the esc can cause the FC's M1 to fail?
What about all WKm users that have the esc's under the motors?
What will DJI do for them?

Problem are not the power leads but the flat cable that drives the ESC. I guess it cannot be
longer as it comes with a standard ESC.

Originally Posted by redridinghood

So having longer power leads on the esc can cause the FC's M1 to fail?
What about all WKm users that have the esc's under the motors?
What will DJI do for them?

Longer motor leads and ESC leads have always present problem. That's why the leads are not as long as in S-800. The same apply to the ESC we use is not over the counter type. It is the combination of S-800 ESC and MC.

If WKM users have esc under the motor using original ESC wire length, I don't see a problem. What do you want DJI to do?

What is OSD?

Ón screen display??

Well done DJI, received my Z15 this morning, now DJI is replacing my damaged S800 free of charge, very good day for me

Anyone have any idea what the turnaround time is going to be like for just sending in ESC's in the US? Desoldering mine now and mailing them out but I need some sort of rough idea when I can expect them back so I can schedule work!

EDIT: Just got reply from dealer, Colin, that the turnaround will be a couple of days as long as he has them in stock, which he assures me he will.

Yes, we are expecting a shipment of new esc's within days and we can start doing the esc replacements ASAP and get them back to customers.

Robert

Originally Posted by Spyde

What is OSD?

you will get an OSD transmitter in 5.8 ghz 500mw, not an OSD device such as Range video or eagletree

Has anyone tested to see if this Wookong MC issue exists in the Naza?

Originally Posted by sidneyw

Dealers, and customers who sent email to S800@dji-innovations.com are being notified of our findings. I believe we identified the source of the problem. This is the reason behind some S-800 owners don't have any issues.



https://www.youtube.com/watch?v=fnfu-R58ERo

If this is the issue then it's not just and S-800 issue and all WKM users should check their correct?

For any Uk owners of the S800 that are affected with this issue please contact us and we will do all we can to assist you .
Our contact details can be found on the website http://quadcopters.co.uk